Search results

  1. R

    Remove Lower Unit - Johnson 60

    Put one bolt back in to hold lower unit in place.-----Stand on the starboard side of the motor.------Find the L-shaped shaft that goes under the bottom carburetor.-----Remove hitch pin on that shaft.----Push that shaft to the port side and rotate.-----Shift rod is now disconnected.
  2. R

    Remove Lower Unit - Johnson 60

    First post the model #-----But I think it is as simple as removing a hitch pin and pushing on and rotating a lever to disconnect the shift rod.----And don't use a hammer for this simple procedure.
  3. R

    89 80 hp Mercury outboard

    you have taken the exhaust covers off the side of the motor?----What do pistons / rings look like ?
  4. R

    1980 Evinrude 115

    Well-----I think that the 1980 model came with a 3 wire motor.----Uses a solenoid for UP and no solenoid for DOWN.
  5. R

    De-Winterizing my 1974 Evinrude Lark 50 50472M Engine and no Crank

    Many starters now have a warning on them.-----" do not strike with a hard object "
  6. R

    1998 Johnson 90HP (J90TSLECM) voltage too high!!!

    What kind of battery is installed in your boat ?
  7. R

    Bravo drive is hard to shift into reverse?

    delete
  8. R

    Bravo drive is hard to shift into reverse?

    Are you sure that is the reverse gear ??
  9. R

    Help! 1992 Johnson Tracker 60hp pro series

    deleted
  10. R

    06 Johnson 90 2 stroke slow activation

    No it is not.----On many motors the tell tale water does NOT circulate through the block.------It indicates that water pump is pumping / working.----It does NOT indicate that motor is cooling properly !!
  11. R

    1998 Johnson 90HP (J90TSLECM) voltage too high!!!

    I have said it before.----12 volts and wiring are so confusing.----Do not remove that jumper piece !!----Every one of these motors has that and there are no issues at all.----Motor is 24 years old, why would that jumper piece be an issue today ???
  12. R

    06 Johnson 90 2 stroke slow activation

    Motor will be up to temperature after about 2 minutes of running.----Size of the lake would not matter.
  13. R

    1971 Evinrude SkiTwin carb Bowl

    I do not believe the 33 was marketed in 1971.----If in Canada----evinrudeparts.ca-----might be able to help.
  14. R

    89 80 hp Mercury outboard

    There is no cylinder head on that motor..
  15. R

    PITA finding Mechanic or Surveryor for Pre-Sale Evalulations

    Your insurance company might demand a survey before they will take it on.
  16. R

    Need help with year and horsepower of this motor , Can someone please help me ?

    Enricher has replaced the function of the choke flappers.-----An improvement.
  17. R

    Johnson 48hp special Outboard running problems.

    LITTLE bits of information in your reply, means we can only be of LITTLE help to you.----Don't be shy, post all the information you can.----And answer questions.
  18. R

    Needing a broken spring/fuel

    385653 for assembly with spring.----only about $65.--------It prevents recoil from working if motor is in gear.---A safety device.
  19. R

    Needing a broken spring/fuel

    So you have about a 1972 to 76 model 20 / 25 HP.----Yes it has a fuel pump.----Find it on the starboard side of the block.----Follow the hoses to it.----
  20. R

    Lifting Boat off Trailer

    The boat that I am working had the bow eye installed with a wood block as backing.----Well it was a block when new and it was nothing but powder last year.----Now installed with solid ( no rot ) material.----Lift carefully if you trust the bow eye.
View older results
Top