Search results

  1. R

    Advice: 1998 Crownline 225ccr or 2000 FW 235 Sundowner

    We have located 2 potential boats for our family of 4 in New Brunswick, Canada. The river we boat on is large and it is not uncommon to have 1-2' of chop. The 2 potential boats are: 1) 2000 Four Winns 235 Sundowner stainless steel dual prop, 5.7 liter(350 cc) 280 hp with volvo penta lower unit...
  2. R

    1997 Wellcraft Eclipse 2400SC build quality?

    Just wondering if anyone has experience/knowledge regarding this model. Reportedly it has a one year old 5.7 fuel injected motor with a reconditioned DP. Engine serial # 4110141349 Model 5.7 Gi PLKDCE The owner reports that it was only used in fresh water. The boat has been bottom painted so I...
  3. R

    4 blade turning point hustler

    Looking for some advice. Here is the info I have: 1990 Larson All American 21' cuddy Approx 3000 Ibs 4.3l mercruiser 175 hp 1.84 ratio alpha 1 gen 1 19 pitch 4 blade 14" dia light chop and 3 people on board produced the following results 37 mph at 4200 rpm wot 25mph at 3000 rpm 30mph at 3500 rpm...
  4. R

    2000 Doral 216 Platinum Cuddy

    Re: 2000 Doral 216 Platinum Cuddy Does anyone have any further thoughts on this boat. I will be travelling down to see it the weekend. I still have not been able to find any specifications or reviews on the the boat. I have included a picture.
  5. R

    2000 Doral 216 Platinum Cuddy

    Just wondering if anybody has experience with this boat or knows where I can find additional information on this model. We are considering purchasing this boat but have no idea of the appropriate price range . There are approximately 100 hours showing on the meter and it is the original engine...
  6. R

    97 Regal Valenti 23 construction

    I am interested in a 97 Regal Valenti 23 with a 5.7 merc. Reportedly it was used in fresh water only. Does anyone know if these boats had wood stringers or transom? I am worried about rot and would like an all glass boat for my next boat. I also plan to use the boat for water sports. We...
  7. R

    Regal 2150 LSC advice

    We are considering upgrading from a 210 Larson All American cuddy with a 4.3l. It is a 1990. We find it underpowered with the anymore than 4 people on board. We slalom ski and enjoy water sports. A cuddy is a must have for our 2 girls and my wife. I found a 1999 Regal 2150 LSC with a carbed...
  8. R

    1997 LARSON 215 HAMPTON info

    We are seriously considering a LARSON 215 HAMPTON 1997 CUDDY WITH NEW 5.7 MOTOR that was installed last year. VOLVO PENTA OUT DRIVE I/O 2004 SHORELANDER TRAILER 2 AXELS. 2 BATTERIES, COVER AND BIMINI TOP. CAN BE SEEN AT END OF JASPER MINE RD IN COLCHESTER VT. We currently have a 1990 All...
  9. R

    1996 24' Celebrity bowrider- wood or fiberglass contruction

    I considering a 24' Celebrity bowrider. Comes equipped with the 5.8 liter Volvo Penta with the Volvo Duo-prop. Would this boat have wood core? Looking to upgrade from a 1990 Larson and don't want to have to replace stringers, floor etc. Already have that T-shirt.... Thoughts?
  10. R

    5.8L Mercruiser with Vovo Penta duo-prop??

    Considering a new to me boat: 1996 24' Celebrity Cuddy Cabin 5.8 fsi Mercruiser Approx. 350 hrs hydraulic trim tabs Based on the pictures in the ad it looks like a well cared for boat. I suspect it may have been used in salt water but will confirm with the seller. I am confused by the...
  11. R

    Slight power surge 1st time up on plane each day

    1990 4.3l merc with 2 bbl carb. 175hp I don't think this is much to be concerned about, but thought I would ask anyway. The boat has been quite a handful since the new rebuilt installed last year. It will pop once through the carb and surge a bit while getting up on on plane the first time...
  12. R

    4.3l merc temperature sensor replacement options

    Re: 4.3l merc temperature sensor replacement options Here is the housing. I checked the temps with an IR gun. Boat is running well - I should have checked the darn sensor sooner.
  13. R

    4.3l merc temperature sensor replacement options

    Seems I have a bad sensor. Are there any readily available sensors from Canadian Tire that I can use (only store open on Sunday)? Looks like a standard auto sensor. Motor details: 1991 Serial: 0C877775 2 barrel carb It has the newer version thermostat with no poppet balls ( I think it is...
  14. R

    Running hot at low speed

    Re: Running hot at low speed Thanks AllDodge. This site has been an amazing source of info. I have read a little more on this site and found another interesting bit of info to double check. Seems Bond-o and Don S have seen some issues with the thermostat housing before. There is a chance that I...
  15. R

    Running hot at low speed

    Re: Running hot at low speed I replaced the gasket in the picture with an OEM (pic below). The riser and manifold seemed to be unrestricted when I had it off the boat, but I understand your concern about the rust. They will need to be replaced soon - maybe this fall. Really appreciate your...
  16. R

    Running hot at low speed

    Re: Running hot at low speed Here is a photo showing the riser setup.
  17. R

    Running hot at low speed

    Re: Running hot at low speed A few pics of the starboard riser.
  18. R

    Running hot at low speed

    Re: Running hot at low speed Sorry for the lack of motor info. 1991 4.3 2 barrel 175hp alpha 1 21' all american larson with a small cuddy 2850 pounds dry The thermostat appears to open at 160 and close at 140. I put the oem gaskets in - open window on all 4 water journals. It is a...
  19. R

    Running hot at low speed

    Some history. I had the raw water hose pop off and a minor overheat the end of last year which cost me some new shutters. Compression test checked out and the mechanic said it did not hurt the motor. When I took the boat for a 5 min test run I noticed a bit of steam from the valve cover vent...
  20. R

    Trim sender set too high (27")

    I noticed that the drive seemed to trim up higher than normal on the trailer. I checked it and sure enough for some reason the ram is 27" and it is supposed to be no more than 20 3/4". I trim by sound so I don't think I trimmed to too high while under way. Thoughts on whether I should be...
Top