Search results

  1. T

    help wiring trim/tilt for 1988 88johnson hp

    i have a 88hp johnson that has trim and tilt but there is no wiring left but 2 black wires connecting to a switch of some kind onthe trim/tilt, and the thers 2 wires 1 blue wire and 1green wire i know that when i put those on the battery it goes up or down, the problem here is that i dont know...
  2. T

    88 johnson trim/tilt wiring cut

    i bought a 1988 88hp johnson with power trimand tilt, but the wires are cut at the back of the motor, there are two black wires going into a small harness and the other two wires are blue and green. the trim and tilt works if i put the two color wires one on each postof the battery it will...
  3. T

    omc sterndrive i have is 800 or 400

    hi there i have a omc motor inboard 3.0 motor and i have the outdrive or sterndrive, but im not sure what size it is if its a 400 or is it a 800, i was hoping someone could help find out
  4. T

    1969 115hp evinrude hydro /no spark

    hello i have i have my grandfathers motor now, but it has no spark and it means alot to mean ,i just cant get rid of it. so i was hoping someone on here could help me get it going again.it turns over fine it has 135psi on each cyl but no spark
  5. T

    69 evinrude 155 hp need help wiring key up

    i have a 69 115hp evenrude electric shift/push button control. that i need to wire up to the key ingntion but i dont know what wires go where, there is only {1=black wire/1=purple w/white stripe/,1=yellow/, 1=purple,/,and 1=red/ but there is one gray wire,and another purple wire that comes from...
  6. T

    push button control wiring for 69 115 hp evrde

    i have the controls hooked to the motor but now i need to find out what wire conects to the ingntion if it does,theres a harness thats hooked up then theres a extra wire i think its purple does this wire connect to the ingntion , and if it does on what letter on the back of the key ingntion does...
  7. T

    1969 115 evinrude key wiring/push button ctrl

    hopefully you might be able to help in this problem,i have a 1969 evinrude 115hp elctric shift,controls for this motor are push button f/n/r then you have your throtle lever what i need is to find out on how i hook up the wiring from the motor and control box to the new key ingntion?????? please...
View older results
Top