Search results

  1. Scott Danforth

    What´s the best replacement for AQ271C (or 570) 5.7 GM engine, ideally stroker?

    you can view it here http://boatinfo.no/lib/volvo/manuals/aq280-dpc_drive.html
  2. Scott Danforth

    470 Distributor Mechanical Advance

    and how do they help you with the prestolite distributor you have?
  3. Scott Danforth

    1988 GM OMC 5L points gap???

    make sure to file the points with a points file or you can use your wifes nail file use the gap as a rough set use the dwell meter to get you dialed in
  4. Scott Danforth

    What´s the best replacement for AQ271C (or 570) 5.7 GM engine, ideally stroker?

    once you have the drive off, the clamp ring is around the PDS housing sticking thru the transom. the front lag bolts should go into a big block of wood and fiberglass mounting to the stringers and the hull.
  5. Scott Danforth

    Merc 3.0 Cracked Block but Manifold ok?

    so hop in a car, drive south, buy it in the US, buy a tee shirt, drive back north.
  6. Scott Danforth

    Stringer repair

    the first one is a -3ORB to -4JIC the second is a -4ORB to -4JIC 90 degree elbow both common hydraulic fittings if you look at goodridge pre-crimped brake lines, they are available in #3 and #4 and come pre-crimped. see your local race shop put heat srink tubing over the steel fitting, or...
  7. Scott Danforth

    wellcraft not charging

    the serial number is on the side of the motor just above the starter. it will be on a tag that is riveted to the block take your alternator off the motor and take it to a starter/alternator repair shop and have tested.
  8. Scott Danforth

    What is this boat

    what does your paperwork (title/registration/bill of sale) say it is? if there is no paperwork, its a yard planter in many cases.
  9. Scott Danforth

    Merc 3.0 Cracked Block but Manifold ok?

    over a $300 manifold you want to chance the engine? buy a new manifold
  10. Scott Danforth

    It's 2020

    release the mantis..... Mantis eating Murder Hornet
  11. Scott Danforth

    470 Distributor Mechanical Advance

    you dont have a billet distributor, you also dont have a sunnen distributor machine to set the distributor up
  12. Scott Danforth

    470 Distributor Mechanical Advance

    Pull the dizzy, knock the roll pin out of the gear, pull the inner shaft, look in the housing. All dizzys have bushings, and napa has generic bushings for dizzys cheap
  13. Scott Danforth

    Tachometer conversion

    if you have twins, you also have an engine sync gauge both tachs need to be connected for the "system" to read properly
  14. Scott Danforth

    470 Distributor Mechanical Advance

    see how much slop is in the $5 distributor shaft bushing from napa also, if you didnt set your dwell with a meter, go back to that, then set timing
  15. Scott Danforth

    Boat not as fast as expected?

    being over-powered means that if there is an issue (accident, etc), you may be 100% at fault. not to mention, your transom is designed for a 150hp. so the forces of the extra 50hp may simply rip it from the boat.
  16. Scott Danforth

    PCV Question

    depends on year. used to be a hose from both sides, then they went with a PVC breather in one side and the hose on the other side. however never simply block it off
  17. Scott Danforth

    What´s the best replacement for AQ271C (or 570) 5.7 GM engine, ideally stroker?

    you take the drive off you then unclamp the PDS (6 bolts), and take 3 of the bolts to jack the clamp ring off you then disconnect everything inside the boat, undo the front mount lag bolts and lift up and pull forward. your boat can not be in the water to do so
  18. Scott Danforth

    Boat not as fast as expected?

    you want to go faster, you need more power. as indicated above, with your 1983 motor that is your crank rating. your boat should be rated at 150hp. how fast do you want to go?
  19. Scott Danforth

    Deck plate question?

    if your sending unit is leaking fumes, you have a bomb.
Top