Search results

  1. Scott Danforth

    1988 Rogue 2420

    new to me carb came in with incorrect secondary metering block and someone butchered the throttle plates to get it to idle correctly because of that. contacted the seller and got a partial refund. going with billet metering blocks. specs - 950HP, marine J-tubes, progressive throttle linkage...
  2. Scott Danforth

    max Horsepower rating

    because the manufacturer only designed the transom to hold 75hp and that is what they rated the boat at.
  3. Scott Danforth

    Engine hours.

    many boat makers quit putting hour meters on their boats because customers were pissed when their boat was out of warranty with such low hours from lack of use. if the boat was used a normal amount, assume 50 hours per year if the boat was used a lot, assume 100 hours per year if the boat is...
  4. Scott Danforth

    GM350 TBI hesitates when accelerating fast...

    you are correct, its a 2-bar system. it should be at 30 psi. (was thinking the automotive side at 1 bar)
  5. Scott Danforth

    GM350 TBI hesitates when accelerating fast...

    TBI is a 1 bar system, so your fuel pressure should be 15psi at all times
  6. Scott Danforth

    Building a '93 Caravelle 1750 Classic Bowrider

    I have two 55 quart coolers I built into the deck. One gets used as a cooler, the other the recycling/trash I keep a box of the plastic bags from grocery shopping in the cabin. we double-wrap food waste so it doesnt grow by the time we clean out the cooler.
  7. Scott Danforth

    GM350 TBI hesitates when accelerating fast...

    what is your fuel pressure?
  8. Scott Danforth

    23’ Harris pontoon w/ 135 plowing in back

    what is the capacity tag say for the motor rating? you may have too big a motor on the back of the boat. are the logs water-logged? what diameter toon logs?
  9. Scott Danforth

    1963 Boston wailer 13 footer

    whalers are built like a big yeti cooler. two pieces of plastic (fiberglass) with foam in between. once the foam gets water logged, its near impossible to get it out.
  10. Scott Danforth

    Back... with a vengeance

    love the old 19. glad your back i am almost done with my resto-mod of my 1988 Rogue. I have literally about $7-8k of cash into the boat resto-mod, however about 5000 hours over the last 4.8 years with all the modifications, hull re-gel, interior and cabin re-upholster and the engine...
  11. Scott Danforth

    2007 Donzi Gel Coat Code

    lets start with why you need the gel...... we can step you thru the rest. if you need to post pictures, keep in mind, you cant post until your 4th post (its in the rules you agreed to when you signed up) photo posting tutorial in the rules and guidelines forum.
  12. Scott Danforth

    Hey Newbies

    thought it was time to re-fresh this link..... Hey Newbies, contrary to post #1 of this thread..... in addition to pointing you in the right direction for you to do the research yourself and learn......sometimes we spoon feed you and take some of our own time to do the research and then give...
  13. Scott Danforth

    Wiring diagram

    SEE THE LINK IN POST #3 and yes, that is yelling
  14. Scott Danforth

    2007 Donzi Gel Coat Code

    first, welcome aboard. even if you had the original color, after 13 years it would have faded. Gel starts to fad almost immediately. your best bet is to custom mix what you need, or spray the whole area.
  15. Scott Danforth

    Stringer repair

    I think Harden Marine buys the reservoir from Coleman Racing Products.
  16. Scott Danforth

    Impeller housing overheating

    first, what is your water pressure? second, what size hose are you using third, what muffs are you using 4th, do you have your hose turned up all the way? you should have water spraying a good 6-8 feet until that motor firs up @Lou C is already hear to comment on the nuances that are the...
  17. Scott Danforth

    Volvo penta Mechanical fuel pump

    the steel line coming from the fuel water separator to the fuel pump and the line from the fuel pump to the carburetor are going to be 3/8" steel tubing with a double flare. (its basically 3/8" brake line for US made cars). the tube nut will have a 5/8"-11 thread per inch thread (again, its a...
  18. Scott Danforth

    1963 Boston wailer 13 footer

    with boat on trailer, weigh it. you know the trailer weight as you needed it to register here in Flonaziland
  19. Scott Danforth

    Crazy Trim Problem - please help my sanity!

    the pump is an oildyne 108 do you have the square Trim display or the round trim display? either way the trim control signals go thru the dash trim and the trim relay, prior to going to the back to the motor control relays. the two relays get power from the dash the motor gets its power from...
  20. Scott Danforth

    1959 Evinrude 5.5 fired up!! Prop depth?

    that motor is too long for that transom
Top