Search results

Nay

Been using them for a several years

Don't know about you but under the house hear is much cooler than outside. Last few days I've been doing square bale work, and it's in the 90s

There is a short somewhere, finding will be hard Need a helper, but place meter on Bat, turn key ON and then turn to start and see if voltage changes

Don't know if this is day ja voo but I've seen this same post here or on another marine web site Deleting previous post to make it clearer for those following 12.5V resting means Bats are at 90% power With starboard motor OFF. What is port Bat voltage at starter prior to starting? What...

Seems most everything is built with lower quality

Good you could use some Vacation I'm sure

The washer should be fiber https://www.ebay.com/itm/197417298334?chn=ps&google_free_listing_action=view_item

Agree one side is higher than the other, and Ill guess your assembly is the newer style that doesn't use the wound washer. Do both sides have the same bushing installed with the knurled edge on bottom?

Many times the heat coming from the bearings is actually coming from the brakes. Might need to replace the brakes, or any of it's parts, won't know until you get into it Bearing sizes are pretty standard, getting the right ones should be easy Using shop rags is no issue same as most any other...

Hope it works the way it says it does Buddy has a 40 Regal that uses packing like yours. He was going to need his re-packed then noticed it leaking even more. Come to find out instead of the outer shaft tube being part of the hull the boat used a Brass shaft tube. Could grab the nut and turned...

You pic shows a 5 wire plug which is made for surge disc brakes and would use solenoid so the trailer could be backed up. You want a 4 wire plug

Don't see a balancer making any noise because "nothing" on it will move unless it's damaged and than the ring is going to go flying off. It's not flying off so it's something else like the ALT, water pump, idler or something else spinning

Is a weird one but with lube coming out water intake holes I would look at the water pump housing

Should add, I would use ACRs instead of an isolator

Vacs can suck them up "but" that will not get rid of them, it only slows them down. Spiders are worst this year than prior, why I have no idea Need to spray the boat and surroundings but that to is bad. Think if everyone sprays 2 to 3 ounces of bug stuff, that is thousands of gallons of bug...

My accountant said similar, you don't know how long you will live so we should claim SS as soon as we could. That said, he also knew we didn't need it, but if another needs the extra income to not be scrimping by, waiting may be a better option

I think it's a good idea to use something to connect Gen Bat to Start Bat in case motor Bat will not start the motor. I don't agree to use the Gen Bat as a house Bat extension for added power. A gen Bat is last ditch to help get Motor started, and with that if motor doesn't start, start the Gen...

Agree, sounds like lean condition Unable to locate your serial number but being a 1996 350 TBI I would have the injectors cleaned and flow tested. Make sure to keep the 2 injectors identified for which side they came from to confirm

They have 87 and 93 on my lake and both are over 5 gal Maybe it's one of those things that it use to but not now, no idea. There is 5 stations in my small town and only one has E0 and it's listed