Search results

  1. T

    Refinishing mohogany swim deck - what should I use?

    Teak oil on mahogany is pretty, I think. I've done it in the past.
  2. T

    Refinishing mohogany swim deck - what should I use?

    I think teak oil alone will be fine. Follow the directions on the can. JimS123 above has outlined a good oiling schedule, depending on what kind of life your boat lives.
  3. T

    Refinishing mohogany swim deck - what should I use?

    Watco teak oil. See here for a before / after. I ran the boards through a planer and sanded the edges, then oiled with Watco teak oil. If you look up a few posts (#264) you can see what the boards looked like before oiling, but after planing.
  4. T

    Restoring a 1990 Larson

    I decided to do similar to what you're doing - tab with 2 layers of 1708 and butt the 1708 on the deck up to the tabbing. I'm going to go over everything with CSM though...no 6oz woven on mine. Your ski locker stuff looks good. I feel your pain on waiting for cures. You can try mixing it...
  5. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    I plugged all my foam pour holes and I got all the 1708 down on the deck except for a small spot in the stern/starboard area - I was boxing myself in, so I left it out and will lay the last piece tomorrow, then move on to the CSM. All my gimbal bearing tools arrived today too. I bought...
  6. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    My eBay ski locker hatch has come a long way. I'll give the oil a day to dry then reassemble. Before and after:
  7. T

    Restoring a 1990 Larson

    You are about to eclipse me! Looking good. I'm trying to get the top layers of glass down on my deck this weekend too.
  8. T

    Opinions on shop's quoted Bravo 3 maintenance cost

    Funny you mention 16mm. Tonight I am upgrading my Suburban tow vehicle to MPI fuel injection and needed a 16mm flare nut wrench for the fuel lines. I went looking through my tools and the only 16mm I have is one side of a double open ended wrench. I said a prayer and used it, and thankfully...
  9. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    I poured foam under the decks tonight. Between the foam under the ski locker floor and all the spaces under the decks, two 16lb kits was the perfect amount. I set the heat pump for the garage on the max (86F) and had my wife turn the kerosene heater on full blast at 3:30pm this afternoon...
  10. T

    Restoring a 1990 Larson

    Yeah, I'm also slightly concerned about how much resin I'm using, but I guess it's too late on my project, as tonight I just finished my 25th gallon. Still, I'm planning on one layer of 1708 followed by one layer of CSM. I'm carpeting my interior, though. Gotta make my decision soon though...
  11. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    Finished tabbing the deck perimeter tonight. I had my wife re-do her hand print on a piece of tabbing since her original one is now mostly covered up by the stringer and deck.
  12. T

    Project with my sons

    Yes, this is what I mean by shipping freight. You must have freight shipped to a place with a loading dock and a forklift. Thankfully my employer is letting me have my US Composites orders delivered to my work facility. If you don't have that option, you can do as you suggested and have it...
  13. T

    Project with my sons

    Regarding hazmat fees and US Composites - if you ship freight (when ordering 10+ gallons of resins, I'm pretty sure it's required) they do not charge the hazmat fee.
  14. T

    '90 Maxum 2100SR - restoration & conversion

    I'm all ears too...it hurts to throw those rollers away! If I'm doing a long day of layups, I find that while it may get a little gummy, the roller and brush can go for several hours by constantly being refreshed with the latest resin. If you stop for more than about 30 minutes though, it's...
  15. T

    Building a '93 Caravelle 1750 Classic Bowrider

    As much sewing as you've done, if the throwable ends up bothering you, just sew a cover for it out of the matching vinyl.
  16. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    I spent most of the day doing indulging in my other boat related passion - whitewater canoeing. After getting home and unloading gear, there was still enough time to get down two layers of 1708 tabbing along the port side of the decking.
  17. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    All the decking is down, ski locker cleats installed, and 2 of the 8 compartments are foamed. I also disassembled my 2nd hand ski locker hatch I got on eBay and sent the planks through the planer. They went from looking like bones to looking like beautiful wood. Can't wait to see the finished...
  18. T

    '65 Lyn Craft Seabreeze 1500 Sport Runabout

    Looking good Buck. Welcome back to the grind!
  19. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    I got the "rear" piece of decking down tonight. I'm trying to be ready to reinstall the cap on April 10. Not as soon as I'd hoped, but I'm trying to not completely ignore my family and other hobbies. My order of operations was: sanded gelcoat where the PB will go, cleaned everything with...
  20. T

    Just acquired a 170 Horizon. Assembly required.

    Do you recommend doing this...going with an aluminum prop first to test before buying a SS prop?
Top