Search results

  1. Faztbullet

    2012 40 HP 3 Cylinder EFI Lower Unit Clutch Dog/Cross Pin Assy

    Check to see if you missed the hole in rod. Goes plastic in shaft, spring compress rod slightly to line up hole in dog. This is not a preload prop shaft but uses desmotronic shifting like bigger motors. Kit is to take some force off shifting process.
  2. Faztbullet

    1993 Johnson 150 -- grinding in reverse

    Check the upper motor mounts as if they come loose (and they do!) it will bend shift rod making it to short
  3. Faztbullet

    Max Throttle on 1995 Evinrude E150 GLEOM

    My 1998 Lowes 24' with 1981 150 V-6 will run 31-34 mph all day
  4. Faztbullet

    Max Throttle on 1995 Evinrude E150 GLEOM

    Not a good idea as spark is at max advance and will create a lean burn.
  5. Faztbullet

    lower unit/ impeller gasket seals

    2 seals on prop shaft, 2 seals on water pump 1 o-ring
  6. Faztbullet

    Ignition help.

    Read post #8
  7. Faztbullet

    1998 Johnson J90TSLECM 90 hp with Jet: leaking water

    Either wrong base gasket or water forced up driveshaft due to seal/seals missing/damaged. Also could be incorrect powerhead from a early 70's series as these are the only ways water can escape the mount area
  8. Faztbullet

    Outboard engine I.D. tag decoded.

    Yamaha built here is link to parts https://www.perfprotech.com/mercury-marine-parts-catalog/model/02/210/4A/6e0-001011-and-up
  9. Faztbullet

    Mecuary 25hp sea pro 2006 cold start issues

    Check to make sure choke flap is closed when pulled out.
  10. Faztbullet

    Ignition help.

    Replace switchbox with Serria or OEM ...none of that junk off Amazon.
  11. Faztbullet

    AC voltage 1990 evenrude

    Make sure the purple wire at rectifier has 12v with key on or rectifier will not turn on
  12. Faztbullet

    AC voltage 1990 evenrude

    25VAC from stator is about right. You clip off top of sine wave and 12.5DC is output on red wire from rectifier.
  13. Faztbullet

    Newbie removing lower end on Mercury 115 4 stroke...

    That is sealer for divider. It has been specified in factory service manuals since 1998. Clean off old silicon and apply new black RTV when reassembling.
  14. Faztbullet

    3 ram trim unit troubles.

    Unit on boat or bench?
  15. Faztbullet

    Accidentally ran 2 stroke mercury 15hp without oil for an hour.

    If its a late model Merosil block it needs rebuilt
  16. Faztbullet

    Badly weathered engine cover

    Some of those later cowls are plastic so clean with some Formula 88 from Home depo and buff wth Mercs cowl finishing pate and polish
  17. Faztbullet

    Evinrude 55 1978 gearcase

    That hole in trim tab adds water to exhaust to cool prop hub
  18. Faztbullet

    Mercury classic 50 HP - part 2

    No repair ot the piston itself only a new one
  19. Faztbullet

    Mercury classic 50 HP - part 2

    Agree....Looks like maybe a piece of reed went thru cylinder. Nothing in a can or spray will fix this. Needs a piston and possibly bored
Top