Search results

  1. Faztbullet

    1995 20HP tiller from short to long shaft

    18/20/25hp
  2. Faztbullet

    1986 ELPTO Mercury 90 Enrichener valve question

    Makes no difference as open or closed
  3. Faztbullet

    1980 Chrysler Sea King 15 Overheating/Waterpump Concerns

    Sea...As I have and several others have stated..you have no idea what you talking about.
  4. Faztbullet

    2000 Mercury 150 efi Tilt and Trim Will not trim down

    Go get em... I am just waiting for the water temp to drop into 40's to go Float-n-Fly
  5. Faztbullet

    1980 Chrysler Sea King 15 Overheating/Waterpump Concerns

    I dont need X-ray vision ..just look at OP post #8 and #15 and clearly shows no build up or salt usage. OP cant answer post #23 as motor came from factory with no t-stat. Sea at least have some knowledge of the motors you are dealing with before you post. And by the way I have work on many a...
  6. Faztbullet

    2000 Mercury 150 efi Tilt and Trim Will not trim down

    Need to make sure you put em in the correct sides as there is a P and S, one has a check valve
  7. Faztbullet

    2000 Mercury 150 efi Tilt and Trim Will not trim down

    Did you remove tilt rods from the unit when resealing?
  8. Faztbullet

    1995 mercury 50elpt4s runs rough

    You need to test when its broke. Invest in a timing light and when it acts up test all 4 spark leads for spark. Could be a coil dropping out under heat soak.
  9. Faztbullet

    1980 Chrysler Sea King 15 Overheating/Waterpump Concerns

    Reading a problem Sea? Owner clearly states this model has no t-stat and pics show no build up. Where you get idea it was ran in saltwater? Sam....All impellers at low speed are a positive displacement pump, then as RPM increases the blades/vanes the flex inward and it acts as a centrifugal...
  10. Faztbullet

    1980 Chrysler Sea King 15 Overheating/Waterpump Concerns

    Guess you didnt read the OP posts Sea.... Sam you need to look in the lower unit for a freeze damage crack or area thats diverting water flow from lower unit.
  11. Faztbullet

    Trolling

    Install trolling plate....
  12. Faztbullet

    1984 50hp Merc Overheating

    Dont waste your time on above post as cleaning or a stick isnt going to help anything. The passage ways in powerhead would clog way before any build up in lower unit would effect cooling. If motor has ever overheated it can blow the powerhead gasket causing this. Also if watertube housing...
  13. Faztbullet

    Yamaha 115 4stroke

    This is a 2 stroke engine not a 4 stroke and from description sound like a 90's year model. Post the model/serial plate info.
  14. Faztbullet

    Motor only fires up when key is turned to off

    Replace trigger
  15. Faztbullet

    1989 Evinrude 140hp rough idle

    Make sure you have correct side plate gasket installed
  16. Faztbullet

    1978 70 hp Johnson throttle problem

    First thing get yourself a OEM manual
  17. Faztbullet

    What is this black sealed box with 5 wires?

    Looks like a old style livewell timer
  18. Faztbullet

    1984 50hp Merc Overheating

    As stated no t-stats and passage will not crude up. A small stick is of no use as a mouse can climb thru the passageway as its so large..
  19. Faztbullet

    2000 Yamaha 50HP bad center cylinder

    Sorry but you need to have a different dream :)!! If there was no oil in fuel the other pistons/cylinders would show signs of siezing and scuffing. What you have is pre-ignition damage. 0
  20. Faztbullet

    1984 50hp Merc Overheating

    Install the tell-tell nozzle as it acts as a restrictor...could be too much water overboard.
Top