Search results

  1. Faztbullet

    Mysterious random misfire, VJ90TLASB

    Run it on the trailer in gear. Index flywheel and take a timing light to each cylinder, if electrical you will see it.
  2. Faztbullet

    Need help identifying 90HP V4 VRO model (1988 I think)

    Needs more TLC than just cable issue...start with compression test
  3. Faztbullet

    2 Stroke Outboard Engine troubles low speed burp/thump.

    Pull the carbs and clean em with new gasket kits. Replace all fuel lines from tank to carbs. You have debris floating in fuel system
  4. Faztbullet

    Anybody ever hear of this one?

    Sync and link off
  5. Faztbullet

    Johnson 150 Rebuild/Remanufacture Guidance

    You can do a OMC/BRP factory break-in in a 1-1/2 hours. I break in all my customers this way. Need test prop and some big water
  6. Faztbullet

    Cylinder Compression Incongruences.-

    Without a t-stat 2 scenarios can happen...1) Motor can run too cold no matter the incoming water temp. The cylinders cannot expand in relationship to piston heat and the rings/piston skirt scuff as expansion rate is off due to over cooling . That the purpose of t-stat to hold water till block...
  7. Faztbullet

    My 1997 150hp rebuild

    Bias circuit is in the switchbox and keeps timing on both switchboxes the same. Advance/idle module plays with the bias to ground circuit to advance/retard timing.
  8. Faztbullet

    Piston Rings Top vs. Bottom

    Put the black one in bottom groove and silver it top groove
  9. Faztbullet

    My 1997 150hp rebuild

    Ignition system is completely separate from battery so no to cables frayed. Usually a bad bias circuit or advance module
  10. Faztbullet

    Piston Rings Top vs. Bottom

    What brand rings?
  11. Faztbullet

    1971 Mercury inline 6 135 hp motor

    Not to many 2 stroke lawnmowers around..only theory that applies is they all need spark, fuel, and compression. First test is compression...what are the numbers?
  12. Faztbullet

    Cylinder Compression Incongruences.-

    It might cold seize without a t-stat
  13. Faztbullet

    Johnson 150 Rebuild/Remanufacture Guidance

    Cut about a inch off blade length , leave squared off
  14. Faztbullet

    My 1997 150hp rebuild

    That is preignition damage....replace switchboxes and remove advance module
  15. Faztbullet

    No spark on 2 of 4 cylinders

    Replace switchbox
  16. Faztbullet

    Johnson 150 Rebuild/Remanufacture Guidance

    Add a lil to gas also. You got a old beat up prop to make a test wheel ?
Top