Search results

  1. flyingscott

    98 xr6 150 backfire issue.

    Are your carbs adjustable?
  2. flyingscott

    25CM water pump issues

    What is your serial # or yr?
  3. flyingscott

    Disconnecting the fuel line, let engine burn gas ?

    It depends on the 2 strk and the injection system. If your motor injects into the fuel line as a VRO or most Mercury carbed motors do, then I would not. Simply because the oil pump is still pumping so you fill the line up with oil. Older Yamaha, Suzuki systems inject behind the carbs so that is...
  4. flyingscott

    Remote control for 2001 Mercury 4 stroke 90hp

    well I can tell you ebay has the best prices
  5. flyingscott

    Getting more from 6hp in High Altitude

    sell the 6 hp and buy a bigger motor
  6. flyingscott

    My 1975 Johnson 40hp does not have a thermostat

    Regardless of it having a thermostat or not it should be pumping water. Revisit your impeller work. It also does not need the prop on to pump water.
  7. flyingscott

    Remote control for 2001 Mercury 4 stroke 90hp

    Get the serial # and look up the part #
  8. flyingscott

    Remote control for 2001 Mercury 4 stroke 90hp

    Ask the owner to send you a pi of it?
  9. flyingscott

    2 stroke 70 hp that hesitates at acceleration

    Running in neutral means nothing. Does spark jump a 7/16 air gap? Carbs opening all the way? Have you tried a different tank and hose? Link and sync done? Roller on the cam have it's outer layer? What is your compression? Timer base moving freely?
  10. flyingscott

    Remote control for 2001 Mercury 4 stroke 90hp

    How many pins on the plug on the motor?
  11. flyingscott

    1985 50HP 4-cylinder power loss

    Do another compression test and make sure your starter is turning fast enough. All plugs must be out for a compression test. If you are using the autoblend system throw it away as soon as possible.
  12. flyingscott

    Link 'n Sync help - '84 Johnny 90hp

    The joe reeves method works well. Just make sure after you timed it you tighten the lock nut down and double check it.
  13. flyingscott

    Link 'n Sync help - '84 Johnny 90hp

    You don't care about idle timing, which is stated in the Joe reeves method, You set idle speed in gear and a warm motor on the water.
  14. flyingscott

    Johnson 150 v6 - fuel pump location

    No the pump itself is mechanical. The electrical harness is for the no oil flow sensor.
  15. flyingscott

    Help in IDing Serial Number on E110TLCE Evinrude

    I have had replacements with the R. Another thing is the model # is not on the disc, and I believe 89 still had model #s and serial #s on the disc
  16. flyingscott

    Help in IDing Serial Number on E110TLCE Evinrude

    The M was the OMC Logo. If it is a factory replacement it should be a 110 hp motor. Does it have a bubbleback exhaust.
  17. flyingscott

    1984 Evinrude 25hp mounting

    looks like the first time in reverse your motor will be leaving you. buy a proper transom extender or mount it better.
  18. flyingscott

    Merc 25 2 stroke/2 cyl remote shift difficulty

    Yes the starter must be removed to get to the shift shaft. How does the lower unit oil look.
  19. flyingscott

    2-Stroke Intermittent Bogging During Break-In (25:1 oil mix)

    Did you rebuild the carbs? Floats set right? Primer lever in the correct position?
  20. flyingscott

    Prop for hole shot water skiing

    I agree the high 5 is probably the best holeshot prop out there. Works really well on I/Os because they like to run deep in the water. They also run really smooth. Any performance drop will probably be negligible.
Top