Search results

  1. A

    Plastic Tanks are All Junk

    Actually a good idea, never thought about a hot melt glue gun....let us know how this lasts..
  2. A

    1988 Mercury 2 stroke 15HP outboard fueling issue

    Even after ultra sound you need to be sure all those teeny tiny passages are clear. Check for any vacuum leaks
  3. A

    motor not running correct

    If your gonna take the carb apart, get a rebuild kit and do it right, a quick clean rarely works well. It will also give you the settings you will need to get started
  4. A

    Mercury 40hp 2-stroke starting problem

    You should be able to hear the choke activate when you push in the key, so...is it working?? Did you actually check for spark on the pkugs? Weak spark does not work well. Plugs can create a weak spark once they have been fouled, try new plugs.. having sat for 3 years, could need carbs...
  5. A

    Plastic Tanks are All Junk

    Due to the material the tanks are made from, there is very little that will stick to it. The plastic tanks actually go thru much more rigoruos testing than steel tanks go thru. The problem is where ever threads are concerned, there is the weak spot. All the testing is not done in the area of...
  6. A

    rod tie down

    After looking at these posts...I like this idea and made a couple of my own from left over kayak cords.
  7. A

    My wee little motor won't run full speed (2000 OMC 3.5hp)

    Yep.. I have the same motor but the Mercury 2.2 hp version. These were made by Tohotsu, they made them for many different name brand names. Mine runs great, 1985 model. Even though you have cleaned your carb, still sounds like you have a blockage some where. Try a rebuild kit for the carb so...
  8. A

    1984 sylvan w/ 110 v4 evinrude lost key

    Normally there is a code number on the control, usually hidden on the back or some where not easily seen. A dealer should be able to get a key with that code number. The other option is to replace the ignition switch with a new one as it will come with 2 keys.
  9. A

    Expected speed from Minn Kota

    While out playing with the 2.2 hp I did lift the main engine up nd out of the water and gained a full 1 mph plus. This might be even better as steering with the bow mounted trolling became more responsive with the main notor out of the way...learning as I go!!!
  10. A

    94 Gamefisher 3.0, what cable for longer control mounting?

    Not from the mfgr but you may be able to retrofit another cable. Gonna take some engineering to make it work but there are lots of generic cables out there, find a good small engine/ lawn mower repair shop, and see what they have
  11. A

    1994 Trailmaster single axle 3500#

    Just remove the tire and hub on one side, get the numbers and put it back on until your parts arrive. Less than an hour easy work....then you know you have the right bearings!!
  12. A

    Towing over rough terrain with outboard down?

    Why take a chance?? Just raise the motor and be done with it!!
  13. A

    Engine will not keep running without enricher being pushed non stop.

    Yep....just cleaning rarely works well, a full rebuild is always better, new gaskets, seat, float adjustment and a good rebuild kit will also give you the proper specs to set the carbs to..
  14. A

    Where to find a solid boat

    Yep, no one can make that call but you.....what all are you using it for??? In my case just fishing and a little running / playing. Mostly by myself, thus the reason for downsizing.. Nice looking boats...they would be a tough choice!!! My concern is how the motors check out...that could be...
  15. A

    Want to get a duplicate engine key made

    I hope your dealer is a lot quicker than those around me !!!
  16. A

    Want to get a duplicate engine key made

    Had the same issue on my boat, dealer must order the key, takes up to 3 weeks. Same story from two different Mercury dealers.. Found a good locksmith that has a large variety of keys, he was able to make me a couple. Dont waste your time at a big box store with the key machine, they dont have...
  17. A

    1992 Sea Troller question

    Finally ran the fuel tank low, it didnt stop running but when you put a hose in the tank the end barely had anything on it. Put 13.6 gallons in the tank to fill it up, guessing probably a 15 gal tank
  18. A

    Expected speed from Minn Kota

    Got back out on the water today, was quite impressed with the little 2.2 hp Merc 2 stroke. The current was moving right at 2 mph according to gps, the little merc got to 3.7 mph going against the current, and over 5 going with it, mabey more as I stopped after passing 5 mph. I am now...
  19. A

    Engine will not keep running without enricher being pushed non stop.

    If you need to keep pushing the enricher then your engine is not gettin fuel. No matter how many times you rebuild the caebs, they need fuel to work....Whether fuel pump, clogged filter, clogged hose, your not getting fuel to the carbs
  20. A

    12volt not working

    Use a volt meter and check for power at the back of the socket, if power is there, you have a bad socket, if no power at back of socket, keep going back until you find power....as mentioned, probably an inline fuse
Top