Search results

  1. R

    Pee problem

    Hopefully you have never run the pump dry.----First thing to do is water pump inspection / repair.----Hopefully the plastic adapter under the engine has not been damaged.
  2. R

    Converting 1979 25hp from pull start to electric start

    Yours has the flywheel with the ring gear.---Hopefully you ordered the correct starter motor and bracket.----The brackets command many beer tokens.
  3. R

    Reed question

    The thin narrow strip is a ---SHIM---On these assemblies.
  4. R

    1988 V4 120 hp Evinrude

    If the motor was totally submerged you need to get it running 24 hrs ago.---Or within a few hrs of recovery..-----If you have trouble then hurry to a shop for help !!!
  5. R

    Converting 1979 25hp from pull start to electric start

    If the flywheel has the ring gear you are good to go.----Any pictures of your starter.
  6. R

    1060 Evinrude fisherman 5.5hp

    I tried but nothing showed up.----I know what a good one sounds like.
  7. R

    2011 Optimax 150 snapped driveshaft

    Where did it snap.------If the exhaust housing is bent then the shaft would flex and fail from fatigue.----Does the break look like it was sliced with a sharp knife or is it jagged ?
  8. R

    1060 Evinrude fisherman 5.5hp

    The 1960 models were the first year to use a fuel pump.----The one of the 6 HP from 1965 to 1979 will work.----Plus many others motors that use the little square PRESSURE driven pump.
  9. R

    1060 Evinrude fisherman 5.5hp

    Not sheared but it appears to be the wrong key.
  10. R

    '95 120hp compression test results

    deleted
  11. R

    87 johnson 30 throttle help

    There is a wee clip #310729 available that holds the cable onto part #83.-----Look for it in ---accessories.----That clip was available / used on many motors in the 1970's
  12. R

    How critical of an issue!

    Looks like motor was tilted in freezing weather.----Have your local fab shop weld that up now.----Not later.------There is an o-ring at / near the front of the crack.
  13. R

    1986 Force 125 hp popping

    Did you torque the flywheel nut and to what value ?----Your description is classic of a sheared key.----Some will argue , but I would check the key again.
  14. R

    1060 Evinrude fisherman 5.5hp

    I normally just use some old head bolts from a 5-1/2 or 6 HP to pull them on small motors.
  15. R

    Questions about starting a marine repair business

    There is lots of demand for service.----Just hard for a start-up to get in on the action.----Once spoke to a shop owner who said.------Folks line up to pay $20 / gallon for coffee.----Yet they grumble at $80 / hr for skilled service / repair work.----Many shops charge more to cover overhead.
  16. R

    1060 Evinrude fisherman 5.5hp

    Use the 3 bolt holes to pull the flywheel---1/4-20NC thread.
  17. R

    8hp Johnson water out of exhaust

    Checked exhaust for blockage ?
  18. R

    Questions about starting a marine repair business

    Most shops are closing up these days.
  19. R

    8hp Johnson water out of exhaust

    What is the model # of this motor ?-----Was it a long shaft now converted to short shaft.---Yes , no or no idea ?
  20. R

    Sierra Spark Plug Boot Fitment to Champion Plugs

    Any pictures of the old boots and these sierra replacements.------Seems strange that a common part like that is giving you problems !
Top