Search results

  1. flyingscott

    Best Way to Clean Injectors.-

    Oh relax you are always so thin skinned. I gave you the correct answer they need to be pulled and sent somewhere to be cleaned. No mechanic in a PLASTIC bottle is going to help you. But you just sit around until someone gives you the answer you want. Good luck with your motor.
  2. flyingscott

    Please advise on first outboard purchase

    Mine recomendation would be any OMC 9.9/15 2 strk made from 1980 into the 2000s. They are cheap reliable parts are readily avilable and fairly light.
  3. flyingscott

    OB will not engage forward it only revs. Reverse works Fine

    From 9 yrs ago?
  4. flyingscott

    91 Mercury 100 won't run past about 1800 rpm

    You need to be looking at the bottom 2 cylinders. Yours is a 2+2 motor it runs on the top 2 cylinders until 1800 rpm then the bottom 2 kick in. All 4 cylinders should have spark all the time. The 2+2 function is controlled by the carbs. The bottom 2 carbs only have a tiny idle circuit to provide...
  5. flyingscott

    Best Way to Clean Injectors.-

    Find a Unicorn maybe it will clean your injectors!
  6. flyingscott

    Best Way to Clean Injectors.-

    There is no mechanic in a can that will clean periodically. You either use a preventative from the begining or?
  7. flyingscott

    Best Way to Clean Injectors.-

    Send them out to Brucato power.
  8. flyingscott

    1999 Evinrude 90 V4

    How about before you do anything do a compression test?
  9. flyingscott

    1999 Evinrude 90 V4

    That pic you put up is a looper intake not a crossflow intake. The OP has a crossflow which will have traditional carbs. So no it will not have adjustments.
  10. flyingscott

    Need help identifying 90HP V4 VRO model (1988 I think)

    Look for a silver disc on the block itself.
  11. flyingscott

    83 Johnson 9.9 slipping

    I would try a different prop first.
  12. flyingscott

    Confrim my suspension

    3 cylinder OMC I would look at the exhaust Cover. They are good for leaking water there.
  13. flyingscott

    Lake winnebago launch for larger boats

    You will have to google a little bit. High cliff/Sherwood Marina Jefferson Park Menasha Doty park Neenah. And there are other ones those are 3 to start with. And Oskosh itself will have a couple for sure along with Fon Du Lac
  14. flyingscott

    91' 25 HP Evinrude noise supressor (air box)

    Your motor did not come with an airbox. Came like that from the factory there are no parts missing.
  15. flyingscott

    68 Johnson 9.5

    If you want to go faster buy a 77 or later 9.9 hp motor. It is a significant jump in power compared to the 9.5 hp. The 9.5 will never be the motor you want it to be.
  16. flyingscott

    25hp mercury tracker cranks but will not start

    That is a bad video that has nothing to do with a 25 hp Merc. Disconnect the black with yellow stripe wire from the cdi box.
  17. flyingscott

    TDC question? 1978 75hp johnson

    If it wont rev above 3000 rpm I would do a spark test.
  18. flyingscott

    Mercury 18XD issues

    Your switch box is probably bad and probably always was.
  19. flyingscott

    1997 Johnson 70 hp water pump impeller o-ring

    My 6 vane housings have that Oring
  20. flyingscott

    1977 Johnson 70 Horse Salvageable?

    edit
Top