Search results

  1. flyingscott

    Possible defective fuel pump or clogged fuel lines?

    The primers are all the same the red handle is on the end and should be parallel to the body. Try this pic. Don't worry about how it's mounted this is the only other pic I have.
  2. flyingscott

    Possible defective fuel pump or clogged fuel lines?

    This is how it should look for running see how it's inline with the body.
  3. flyingscott

    1977 Evinrude 15 HP - Electric Starter Conversion?

    A parts motor is best. The starter bracket is the exhaust cover which you will need to find. You will also need to find the flywheel which is different and the neutral safety switch and starter button. Here are pics of my 77 model. If you want to charge the battery the whole stator assembly...
  4. flyingscott

    Question about Michigan wheel Rapture prop

    I was wondering if anybody has any experience with a rapture prop. My boat is a Starcraft SS 160 with a 1986 Evinrude 70 hp. Right now I run a 17" pitch OMC SST prop the motor easily overevs to 6200 Rpms. So I was wondering if the rapture prop will be a good fit for my boat it is a 19" pitch...
  5. flyingscott

    Snap ring pliers

    Who makes a good snap ring pliers to remove the 2 large rings on the OMC lower units. I broke mine today need to replace it.
  6. flyingscott

    1987 Johnson 70hp Terminal block

    That is because his VRO is probably removed or an older 3 wire version which won't use it in which case it doesn't get used. ​Here is mine ​#1 is yellow to yellow #2 yellow gray to yellow gray # 3 is a gray wire to tach notice the jumper bar hard to see on mine because it's painted...
  7. flyingscott

    16 hp firestone knot meter

    Does anybody know who can repair an old marine speedometer.
  8. flyingscott

    Question about WSM pistons

    I am rebuilding a 110 hp Johnson crossflow and looking at the WSM rebuild kit. I have used these kits before but always upgraded to wisecos. The question I have is do the WSM Pistons have the OMC top ring design or do they have the wiseco style top ring. This is not a debate about piston styles...
  9. flyingscott

    water flow issue

    You can reroute the hose over the top for temporary fix
  10. flyingscott

    Best Mercury Outboard Ever Made - 1984 50hp 4cyl

    This is mine, the hull is identical to yours but the Starcrafts for some reason are rated at 85 hp instead of 90 like the sylvans. I run a 1986 70 hp Evinrude I don't feel the need to put a 85/90 hp on this boat. With this set-up I get 39 MPH with a 15 hp kicker 3 batteries and 15 gallons of...
  11. flyingscott

    Prop turns when pulling starter cord

    This is one of my flying scotts
  12. flyingscott

    Thermostat on a 1987 Mercury 20xd

    Does it look like this your pic is blurry if yes, you have a thermostat. Yes you should put one in there they run better sorry b114 starts the design 2 block
  13. flyingscott

    Getting ready to work on the 140

    I use one I have a 70 hp on it right now. Here is what you need to know. With My 70 hp I can trim it up all the way and it is pretty stable if I take the lower unit off it will tip over. A V4 will be more top heavy so what I do is I will put a hoist on the powerhead to hold it up if I need to...
  14. flyingscott

    Oil leak around propeller hub

    This is what my lower unit looks like on my 2 hp after winterizing oil in the exhaust is normal my lower unit is tight. I would be more worried if there was no oil in your exhaust. All my motors look like this if I go out there right now most of my motors will have drops of oil under them.
  15. flyingscott

    Starting battery 2 motors problem

    Hello I need to a switch that can isolate my 2 motors from each other. The problem I am having is with both motors connected to the starting battery I am blowing the regulator on the main engine. My main engine is a 1986 Evinrude 70 hp my kicker is a 1977 15 hp Johnson anybody have any ideas...
  16. flyingscott

    1982 3.6 hp mercury

    Is this a good motor. I am looking at one has compression and spark but doesn't run. If I buy it what problems should I look for .
  17. flyingscott

    gmc canyon /chevy colorado towing question

    I am looking at buying a 2005/6 canyon/colorado. The truck has the I5 3.5 litre crew cab. What I want to know is are these a good tow vehicle would prefer to here from people who own and tow with them thanks.
  18. flyingscott

    Tohatsu m90a crank question

    Hello I need to know if i can replace the main bearings on the crank of my tohatsu m90a if so are they available.
  19. flyingscott

    1986 evinrude 70 hp piston

    What would be the best piston for my rebuild
  20. flyingscott

    1986 evinrude 70 hp outboard motor

    Hello my 70 hp evinrude will idle and troll really well for about 10 to 15 minutes then slows down and dies. I then have to push the high idle lever all the way forward and prime it to get it running again. good compression and spark linc and sync has been done. Any ideas
Top