Search results

  1. alldodge

    Alarm Going Off for Mercruiser 350 Mag MPI

    Glad your fixed but 5.5 hours to replace is a bit much. Doesn't take me that long and I have to hank upside down to get
  2. alldodge

    Koehler generator

    See pdf page 32 or manual page 3-4 http://www.30plus.org/Chief_Plasma/Kohler-TP-5695.pdf
  3. alldodge

    Koehler generator

    Depends if its gas or diesel and what Temp it will be used in. Model number would help. For the most part its 10w30 or 10w40 which gives a Temp range from -4* to 100*F for gas.
  4. alldodge

    '85 Oildyne Trim Pump Reservoir - Can I switch from metal to plastic?

    Was just looking at the Oildyne new style manual and Merc manual 4 for old style. The old uses several screws which hold the bottom plate on, the new uses one in the bottom center The old pump motor appears to use more screws to hold in on the top then the new In short I don't know
  5. alldodge

    Volvo Penta DP-S Parts Diagram?

    If your looking for parts breakdown https://www.volvopentashop.com/epc/en-US If your wanting a manual, suggest VP
  6. alldodge

    More U-joint knocking?

    If you notice/feel any play in the U joints they need to be replaced Gimbal should feel smooth as silk when turned with your fingers
  7. alldodge

    Mercruiser 5.0 dies while idling - no fuel from line

    Look inside the bowl if you see the carb dripping. My guess it is dripping, and then need to find out is it the needle, incorrect float setting or float is to heavy
  8. alldodge

    Hunting

    Not a big hunter mostly because Admiral doesn't want me to kill Bambi. She probably won't mind the day after one hits her car :unsure: Bought some more rounds last year to get one, and didn't even go check the sightings. Anyway I'll stop winning and back to your question. Doesn't matter if...
  9. alldodge

    Mercruiser 5.0 dies while idling - no fuel from line

    ok, the carb is flooding the motor.
  10. alldodge

    RPM falling back or motor stops

    This should help https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwjv4d7i3c7yAhUbRjABHUhJD-gQFnoECCQQAQ&url=http%3A%2F%2Fengine-manual.com%2Fen%2Findex.php%3Fcontroller%3Dattachment%26id_attachment%3D135&usg=AOvVaw389rInABUISq7vvrp3hv66 I found it by searching volvo...
  11. alldodge

    V/P 5.7 GI-D not reaching above 3400 rpm

    Thinking the motor might need a valve job with your compression numbers. A new motor would be 150 so with seeing 180 the gauge is probably off. If we reset the 180 to 150 which puts the 150 at 120. In any case there lowest should be no more then 10% from the highest Before pulling heads it...
  12. alldodge

    Mercruiser 5.0 dies while idling - no fuel from line

    Fuel pressure is good but fuel line is dry when motor is shut off when warm. The antisiphon valve is working and fuel is not draining back. If the above statement is true, then its either the pump or the rubber fuel line is collapsing inside
  13. alldodge

    Can someone identify my control?

    This is the area with all the controls https://www.mercruiserparts.com/remote-controls-and-components-1986-th and this looks like it https://www.mercruiserparts.com/bam/subassembly/32078/1989/50
  14. alldodge

    Quality gimbal bearing tools

    No, and sales, gimme and trades are against the ruled
  15. alldodge

    Quality gimbal bearing tools

    HP is High Performance such as X, XR and XZ drives Your good the regular Merc, VP, OMC bearing will work Might even find some new old stock (NOS) greaseable bearings (I stll have 2 NOS on the shelf
  16. alldodge

    Kill switch diagram

    Then you should be good with making the kill switch normally closed (NC) so when its pulled it opens (disconnects power) to the motor
  17. alldodge

    Kill switch diagram

    No Your mixing 2 cycle and 4 cycle Need a bit more clarification to make sure what your doing. Reason is because if the boat is a 2016 then the control and wiring will match and should already have a kill switch. Your asking so my guess (using my pea brain) is we are not working on the same...
  18. alldodge

    Kill switch diagram

    Are u talking about 2 or 4 cycle, and ......... what motor are we discussing
  19. alldodge

    Quality gimbal bearing tools

    All of the bearigs are the same for VP, OMC, Indmar, Merc (MR, pre, gen 1 , gen 2, bravo), and only difference is if you have a HP transom assembly. What is your serial number?
  20. alldodge

    Kill switch diagram

    To kill a 2 stroke motor the Magneto is grounded To kill a 4 stroke motor 12V is removed from the coil 2 stroke Note the M terminals goes to the Magneto. One of the M's connects to ground. When key is turn OFF it grounds the connection. Same thing happens when the kill switch is pulled 4...
Top