Search results

  1. alldodge

    Thermostat Housing Check Balls

    Yes, full open The port side may still be a tad bit hotter then the starboard at idle. Its just water flows easier that direction, but can keep your hand on it
  2. alldodge

    Thermostat Housing Check Balls

    I would go to design 3 and remove the elbow connection
  3. alldodge

    Thermostat Housing Check Balls

    Who knows why Merc does what they do, but just guessing is they had several left over design 1's. Design 3 was used later and still is. Change over would be easy enough but could also try taking your housing and put in some a cleaning solution, maybe muriatic acid, rust desolver or if its...
  4. alldodge

    1998 Volvo Penta 4.3L GL

    What happened to your motor? Don't know your location but might be able to find one in a junk yard. Then replace some parts to marine. Might be able to get one for $300 maybe then get new exhaust
  5. alldodge

    Mercury Remote Control Assembly

    Most likely you need to replace the lower shift cable. For the no start issue it may be out of adjustment or bad switch. Disconnect the shift interrupter switch on the shift plate and see if it will start.
  6. alldodge

    Fuel Filter

    After the pump, what do you think about before the pump?
  7. alldodge

    Forum update

    HEY !!! Not nice, I want new threads and no.... one......... is working on that :mad:
  8. alldodge

    Forum update

    no
  9. alldodge

    EZ Drain Plugs for Exhaust Manifold & Engine Block on 3.0 Mercruiser?

    Can install the plastic ones which does make it easier. I have them on my motors
  10. alldodge

    Fuel Filter

    Anyone add fuel liter to there the Chrysler outboard? We see canister filters being added today, and have seen none on C-OB until the one on the 140HP i got yesterday.
  11. alldodge

    Upgrading batteries and charging system

    I just bought another one of these my self https://www.bluesea.com/products/7610/SI-ACR_Automatic_Charging_Relay_-_12_24V_DC_120A
  12. alldodge

    Wiring

    Mains 10awg, otherwise it depends on the load for the circuit. If your going to led then the load decreases. The pic is for additional wiring, not the motor wiring. Use what the manufacture or the motor recommends
  13. alldodge

    Chrysler 130

    The 140
  14. alldodge

    Chrysler 130

    Picked up a 120 and 140 hp motors, and both are 20 inch shafts, power trim. The 120 has old style leg and the 140 has new style. The 120 has a fuel filter and pump attached to the motor, and the 140 has 2 fuel pumps in series.
  15. alldodge

    Looking for best 2 cycle motor

    This is what I brought home and both are 20 inch shafts, one old style and one new
  16. alldodge

    1988 Rogue 2420

    I like the theory of "off with his head"
  17. alldodge

    Looking for best 2 cycle motor

    Well, the rain didn't last long, so I ran up to wally world and picked up two. Ran back and all good. Called the guy up and he said he would meet me GREAT. Cut 3 hours off the trip So I met them north of Lexington at a truck stop and made it back with a 120 and 140 HP motors, controls and...
  18. alldodge

    Upgrading batteries and charging system

    The bats will take a charge from about any 3 stage charger. The difference is how fast you want to charge them. The lithium will charge faster then the AGM so guess it depends how much time will it be plugged in? The alternator will also change when running, and would suggest using a ACR
  19. alldodge

    NEED Stern LIFT Prop Suggestions

    Agree, the ventilation plate look to high, that is unless your aiming for only the bottom of the prop to contact
  20. alldodge

    Thermostat Housing Check Balls

    There was a change over from the design 1 to design 2 in 1993. Those thermostats can get clogged, even easier if there is salt. It uses a small passage design to restrict water flow to the manifolds. They were also used on some of Merc later racing motors like the 500EFI. The manifold to...
Top