Search results

  1. sutor623

    Change water tube grommet while powerhead is up?

    Hey guys, In the past I have had to pull a powerhead (Johnson 9.9) to change a leaking water line grommet. Motor wasnt getting good flow. Now, with my v4 Looper, I have the powerhead up, but would you guys recommend pulling the midsection apart and changing the water tube grommet while the...
  2. sutor623

    130 looper vs. 140 looper

    Any of you guys have an idea what the difference is in these two motors? I was comparing the two on shop evinrude.com ('95 130 and '94 140) and it looks like the only difference is the high speed jets and possibly the intake manifold? Although I have heard the intake mani's are cross compatible.
  3. sutor623

    Questions about Powerhead break-in??

    I have decided to go with a remanufactured powerhead. Dont have the time to fool with the old block right now, and just want to get back on the water. If I ended up doing a rebuild, I would have wanted to replace all bearings, pistons, etc. to avoid another failure in the near future. So I...
  4. sutor623

    Remanufactured powerhead recommendations?

    Hey guys pretty sure I'm not going to have the time to perform a rebuild, lack the necessary tools,no good machine shop around for miles, and pretty sure my crank journals are shot. That all being said, there are tons of reman places on the net. Anyone have any good or bad experiences with one...
  5. sutor623

    Tear motor down or try a new headgasket?

    Hey guys, most of yall know I have been having issues with my'95 130hp. Finally figured out why the head wasnt reaching operating temp and fixed that. (water blockage on port side head.) I have been wondering why the motor fails cylinder #1 and #3 drop test at idle. I suspected a past overheat...
  6. sutor623

    Cooling water pathway on V4 looper.

    Trying to get an idea exactly how the cooling water flows on the V4 loopers. I am working on getting some pics up right now.
  7. sutor623

    What kind of temp sensor and gauge are you guys using in your heads?

    Wanted to install a temp sensor in V4 looper port and starboard head. Any particular brand or model you guys have used? Thanks fellas.
  8. sutor623

    V4 Looper Cylinder heads warming up at different rates.

    1995 V4 130HP looper Got some questions about head temp differences. Starboard head takes much longer to reach operating temp at an idle. Starboard plugs also seem to be fouling and are wetter. Compression in all 4 cylinders is 135psi. Motor runs very strong at cruise and WOT. Idles well...
  9. sutor623

    Intermittent ignition issue driving me mad!!! 130 V4 looper

    Hey guys, Some of you all know that I have been working with a '95 'Rude 130 horse. This is a looper, 90 degree, single powerpack engine, with quickstart and SLOW. She's been coming along nicely, and letting me get some good fishing time in. Brief history, motor sat for 5-6 years under cover...
  10. sutor623

    Air leak at fuel tank fittings?

    Hey guys, I have installed some clear hoses in my fuel system to find an intermittent idle/hard start issue issue. I have found enough air coming in from the gas tank to concern me with leaky fittings. I have isolated the air as coming in after the fuel tank and before the fuel/water separator...
  11. sutor623

    Primer Solenoid gone bad?

    Hey guys Motor has been backfiring at startup and hard starting when cold. I can hear the solenoid engage when I push in the key, so I disconnected the fuel primer lines off the carbs one at a time and am not getting fuel. anyone ever cleaned up and rebuilt one of these? I replaced the main...
  12. sutor623

    Homemade flywheel holder

    $7 piece of steel angle iron. I have seen a few of these on here. Just thought Id share mine. Downside is you'll need something to cut steel, drill steel, and weld it. I have an old chop saw that I leave a metal cutting blade on and I have used it countless times. Vise holds everything so that...
  13. sutor623

    Abnormal Timer Base wear??

    Hey guys been having some intermittent ignition issues with my V4 130Hp. Problem is intermittent, and only happens after a 30 min run. Idles and runs great at first, then warms up real good and acts up. I have caught it dropping spark on cylinder one in the driveway, and cylinder three also, at...
  14. sutor623

    Added O-ring to VRO in 1998?

    Hey guys just wondering..... I suspect issues with my VRO (capped oil side) and it is a pre-1998. The fuel diaphram does NOT have the O-ring that they added in 1998. Were there some issues with the pump letting in air at that site? Can you just add the O-ring or are the housings different? (I...
  15. sutor623

    Home made outboard test tank

    Hey guys can get a really good deal on one of these tanks. Was thinking about cutting an access hatch in the top so I can run my motors at home in gear. They are 250 gallons. Wouldn't plan on WOT, but def would like to run 1/2 throttle or so. What do yall think about this??
  16. sutor623

    Permanently disengaging Quickstart??

    Hey guys '95 OMC 130HP. I found out my timing is all over the place when starting the motor, sometimes even after it warms up, only in idle. I disconnected the black/white wire from the powerpack and jumped it to ground. I also disconnected the yellow/red wire INSIDE the power pack. Motor ran...
  17. sutor623

    Pre- VRO fuel pump sizes..............

    Hey guys, just wondering if you more experienced fellas could help me with this. I am having trouble with the VRO alarm going off so I just disconnected the oil side. When I re-installed the VRO after a diaphram rebuild, a piece of the plastic cracked a little when I tightened the screw down...
  18. sutor623

    Need help with E-rude 130hp idle issues............

    Hey fellas, Motor is a 1995 Evinrude 130 hp looper, E130TXAOR. Got her after she was setting for 5-6 years. I replaced the VRO diaphrams, changed the fuel lines, fuel filters, rebuilt the carburetors and put in new waterpump & thermostats. Compression in the motor is 135psi in all 4...
  19. sutor623

    How would you guys say these spark plugs look?

    Hey fellas, Motor is '95 130 Rude. E1130TXAOR Looper. She runs great at cruise and upper RPMS. Sounds excellent too. I just did a fuel system overhaul (including onboard fuel tank) and want to make sure that my cylinders aren't running lean, so I decided to take a peek at the plugs. Put about...
  20. sutor623

    HELP!!! She's taking on water captain!! Anyone know what this drain port is?

    Hey guys, my new to me boat has been taking on water. Just a tidbit of info, flotation foam is dry, and I weighed the hull and it matched NADA specs. Boat took on 40-50 gallons of water in 6 hours of cruising/anchoring up. It did this for two trips, and on the second trip I was sure not to let...
Top