Search results

  1. phillnjack2

    lync and synce confusion , please help

    Re: lync and synce confusion , please help Ok now this Engine is realy getting on my nerves . I now have a 14 lb sledge hammer sitting very close by that is looking very tempting :mad: . I will start from very beggining of todays escapades with this bucket of SH$$ :facepalm: The carbs...
  2. phillnjack2

    lync and synce confusion , please help

    ok ive got a 1995 evinrude 60hp triple Model no BE60TLEOC Serial no G 03751787 im trying to get the carbs and timing syncronised, but i am comming up against a brick wall.:confused: this is what i read the throttle should start to advance the timing before the throttle opens the carbs or...
  3. phillnjack2

    Testing a vro fuel pump on fuel side only ? help please

    I have 2 vro fuel pumps, i dont know if any of them is good or bad, i wont be using the oil side for sure as i do know both of them are bad on the oil side. what is the best way to test the fuel side of these pumps to know if they are any good or not ? what sort of pressure does the pulse give...
  4. phillnjack2

    Evinrude 1995 60hp running terrible help needed

    Model no BE60TLEOC Serial no G 03751787 Year 1995 Ok here we go again :facepalm: The engine was running very nice, plenty of power nice idle, picking up very good but no more than 5700 revs. ok so the WOT revs are a bit low for a 13.5x 15inch pitch prop on a 13ft boat, but i could live...
  5. phillnjack2

    evinrude 60hp max revs 5700 ?

    engine is 1995 60hp triple model BE60TLEOC i have tried a few props now and my engine seems to be limited to 5700 rpm's i have been told by a few people that the limiter is somewhere between 6250 and 6750rpm. what could be the reson for me not being able to reach atleast 6,000rpm ? the boat...
  6. phillnjack2

    tohatsu 25hp prop ..what else will fit it?

    Hi guys A friend of mine has a 2 cylinder 25hp tohtsu that runs and purrs like a new engine. we know its getting on abit but its a real good little runner,just needs a decent prop on it. Now the problem is we have a prop on it thats on its last legs, and we want to know what else could fit...
  7. phillnjack2

    evinrude 1995 carbs sizes of 60hp and 70hp ????

    Evinrude 1995 3 cyl 60hp engine model BE60TLEOC Hello folks. My engine is the 1995 evinrude 3 cylinder 60hp triple. to look at its identical to the 70hp model and i need to know what is the actual difference in the carbs on these engines.:eek: The outer body even looks identical to mine...
  8. phillnjack2

    johnson 140hp 1977 coils !!

    engine model Johnson 140ML77S 140hp we are having a few problems with the coils on a friends 140hp johnson, year 1977. the coils have gone past their sell by date as the wires to them are breaking up and corroding. can i put coils from say a 1990's engine on this engine or is their going to...
  9. phillnjack2

    waterpump impeller change

    Re: waterpump impeller change The Evinrude e-tec engines dont need any engine service for 3 years.....yeah ive read that rubbish many times.. Now go check the small print about impellors,youl find if the engine siezes up due to a worn impellor your warranty is then void!!!! the impellor is...
  10. phillnjack2

    what RPM'S is the limit on the ignition of a 1995 60hp 3 cyl Rude

    The engine is 1995 Evinrude 3 Cylinder 60hp.(54ci) Model no BE60TLEOC Serial no G 03751787 Made in USA I need to know at what revs the limiter on the ignition comes in at ? ive been told by someone at brp its 7,000 rpm's is this correct ? or is it 6500rpms like someone else has told me...
  11. phillnjack2

    Tohatsu M25A2 propeller !!!!!!!!!!

    Hello folks my friend has a Tohatsu M25A2 with serial number 21881. we know this old girl is ancient (76 to 83) but it realy is a good reliable engine now we have coils replaced with a couple from a evinrude. The engine performs as good as new and is pretty good for a 25hp. The prop on the...
  12. phillnjack2

    Fake grass for carpet

    Re: Fake grass for carpet I had fake grass in my broom speedboat back in the late 80's it not only looked good but worked good as well. and was a great talking point when people saw it. Mine was the type with about 2 inch long blades of nylong green grass, the type that is used on fruit stalls...
  13. phillnjack2

    Prop Guards ...what are the pro's and cons of fitting one of these ?

    Re: Prop Guards ...what are the pro's and cons of fitting one of these ? First ill answer the question about trailer lighting in the uk. By uk law and european law every trailer has to have lights, these include indicator (turn) ,side lights and stop lights. the trailer lights are supposed to...
  14. phillnjack2

    Prop Guards ...what are the pro's and cons of fitting one of these ?

    Ok i have one of these bright red prop Guards it came with the engine when i bought it. it needed a couple of repairs and they have been taken care of. Now the promotion of these things leaves you thinking "it cant realy be that good" or can it ? The makers claim for these to improve handling...
  15. phillnjack2

    re-newing all fuel pipes

    ive read on many posts about the older type of fuel pipes being destroyed by the new fuels. what is the type of pipe to get that the newer petrol with the ethonal and other crazy additives dont effect. i am in the uk and going to be replacing all the pipes on my evinrude 60hp to be on the safe...
  16. phillnjack2

    OK new waterpump, now what? :( what a moneypit

    Re: OK new waterpump, now what? :( what a moneypit you either have a stuck open thermostat or running without one. the thermostat can be found easy when yoiu put in a model number of you engine. ive just done mine on a 60 3 cylinder and i too have the 4 bolt thermostat cover. the thermostat is...
  17. phillnjack2

    Engine staying too cool !!!!! help please

    Re: Engine staying too cool !!!!! help please This is the 2 different thermostat covers and the 2 different springs. you can see they are different .. from the outside they look identical. phill
  18. phillnjack2

    Engine staying too cool !!!!! help please

    My engine is Evinrude 3 cylinder 60hp year 1995 model is BE60TLEOC Ok while doing normal service stuff ive changed the thermostat and impellor plugs greased everything checked jusy about everything possible. The engine starts up just like it should and seems to be running fairly good and will...
  19. phillnjack2

    Removing 175 hp from boat

    Re: Removing 175 hp from boat wow...you are strong, holding up a 175hp with just 1 finger :laugh: couldnt resist that one that plate looks like it will do the job nicely. just wasnt sure if the threads in flywheel were good enough if Boobie says its ok then it sure is. phill
  20. phillnjack2

    fitting water pressure guage to 60hp evinrude

    Hi guys. I have a 1995 evinrude 60hp the 56cu in model no BE60TLEOCive got the later tell tale pipe fitting on the top of exhaust housing and like the idea of fitting a water pressure guage along with water temp guage. Ive got the temp guage and fitted that to original threaded hole in top of...
Top