Search results

  1. phillnjack2

    Silly question that i could not answer

    Today i got asked by my friend what are these plates on the side of his engine His engine is a v4 140hp crossflow. i said they are cover plates for the intake by pass ports he then said, so what do they do and why are they there ? i dont realy know why they are there and what they do to be...
  2. phillnjack2

    Please help johnson 140 v4 not firing at all.

    1977 Johnson 140hp crossflow v4 model 140ML77S Hello folks ill explain what me and a friend have done first. We took the thermostats out and replaced with new ones and gaskets and springs etc all that seems to be perfect But now thengine just dont want to fire up !!!!!!!!!!! Checked the...
  3. phillnjack2

    Will Suzuki 13 spline prop to fit omc 13 spline ?

    I would like to know if a propeller that fits a suzuki 13 tooth spline dt60 75 etc will fit an omc 13 spline. My engine is a 1995 60hp 3 cylinder, same props to fit mine are from 1973 to atleast 2000,the 85hp 0mc and 140hp omc props fit mine and vice versa. the prop ive come across is a Suzuki...
  4. phillnjack2

    Propeller convergence ring removal

    Re: Propeller convergence ring removal Here is a pic of an early omc sst propeller with the teflon on but going rusty, then with it taken off and cleaned up. Even with the stainless now cleaned up and looking semi shiny, you can clearly see the bronze ring talked about above. Ive heard many bad...
  5. phillnjack2

    1995 60hp 3 cyl evinrude pistons ,rods ,bearings etc need to know where to get from

    1995 evinrude 3cyl 60hp model number BE60TLEOC. Today i started to strip down my spare engine has it definitely needs a rebore, i knew this already as when i got it the head was off and the pistons out etc. The engine came as a spare with my other engine being a good running engine. i will...
  6. phillnjack2

    re-build of a 1995 3 cyl evinrude 60hp

    Model no BE60TLEOC 1995 3 cylinder . My engine at the moment is running sweet but i have a Identical almost complete spare engine that has scored bore and a badly chewed up piston. im thinking about a complete re-build of the block over the winter/spring period and wondering what the cost...
  7. phillnjack2

    Thermostat question for 1995 60hp evinrude

    Re: Thermostat question for 1995 60hp evinrude cheers guys i was getting a bit worried to see the pin fall out ha ha Now atleast i know its ok . cheers for replys phill......
  8. phillnjack2

    Thermostat question for 1995 60hp evinrude

    Evinrude 60hp triple 1995 Model no BE60TLEOC Today i took off the thermostat to have a check and clean up etc. well i am not suprised now that my engine runs very cold, the thermostat was fitted wrongly and also its stuck solid. put it in boiling water and nothing happened at all, not the...
  9. phillnjack2

    testing checking 2 yellow stator wires 1995 60hp evinrude

    Re: testing checking 2 yellow stator wires 1995 60hp evinrude Well after a lot of swearing and shouting at the engine and telling it, its a pile s**t, the flywheel came off. .:facepalm: I realy cannot believe how much pressure i had to put on it.:eek: I had a 3 ft long heavy duty truck socket...
  10. phillnjack2

    1995 evinrude 60 flywheel torque

    Evinrude 1995 60hp triple Model no BE60TLEOC I am trying to find the flywheel nut torque spec so when re-assembly of the flywheel takes place i am ready to tighten it down. Also does this need to be re-torqued after a certain amount of running time or just left alone. phill
  11. phillnjack2

    testing checking 2 yellow stator wires 1995 60hp evinrude

    Re: testing checking 2 yellow stator wires 1995 60hp evinrude CDI dont say much at all about how to check the stator type i have.:redface: But i did check the 2 yellow wires again from the engine and nothing at all,complete zero check the ones on the spares and do get continuity as it should...
  12. phillnjack2

    Charging circuit for Johnson outboard

    Re: Charging circuit for Johnson outboard Quote ..A charged battery should read 12.5 or 12.6 volts when charged . No this is very very wrong at this state of charge the battery is Flat. The battery should read 14.4 volts before you can call it fully charged, 12.5 -12.6 is a flat battery ...
  13. phillnjack2

    testing checking 2 yellow stator wires 1995 60hp evinrude

    Re: testing checking 2 yellow stator wires 1995 60hp evinrude Ok here is whats happened now so down to the garage i went with new harmonic puller and big hammer ha ha First of all i put plenty of penetrating oil on the flywheel main nut and in the three threads to be used by the puller...
  14. phillnjack2

    testing checking 2 yellow stator wires 1995 60hp evinrude

    EVINRUDE 1995 60HP 3 CYLINDER Model no BE60TLEOC. I am having trouble with getting the battery charging and rev counter working on my engine. I have tried various rectifiers/regulators etc and i am now wondering if i have a stator problem ??? Today with engine running i put my multi meter on...
  15. phillnjack2

    omc 585001 & 584476 rectifiers ????

    can anyone tell me the difference between the omc regulator rectifiers from omc. Part numbers are omc 585001 & omc 584476 both are identical in diamentions on the outside and both have same colour wires. i have been told that they are the same ? is this tru ? on the omc 58001 there is...
  16. phillnjack2

    Rectifier/regulator....OEM or Different maker ? whats best

    I seem to be needing a new rectifier/regulator for my engine. what i want to knwo is is there any benefit from buying a genuine omc unit, or would i be better off buying from the likes of CDI electronics etc . What are the differences in both price and quality of the units. Is an after market...
  17. phillnjack2

    Temp Sender not fitting 100%

    Re: Temp Sender not fitting 100% heat sink compound !!! thats sounds very good to me. i was originaly thinking oil or water, but grease sounds a much better answer. is heat sink compound easily available ? does it go hard or stay soft ? I too think an air gap would be a bad idea. The...
  18. phillnjack2

    Temp Sender not fitting 100%

    I have just got myself a temp guage and sender for my 1995 evinrude 60hp. The pre-drilled and tapped hole is already on these engine for a temp sender, so i got one to fit the thread. ( 1/8th npt ) The problem is i have measured the depth of the hole and the depther the sender sender goes in...
  19. phillnjack2

    S.L.O.W mode overheat ? what else can cause this

    Evinrude 60hp 3 cylinder 1995 Model no BE60TLEOC A few question regarding the S.L.O.W mode that is only supposed to come on if the engine overheats.... What else apart from overheat sensor can cause the engine to go into S.L.O.W mode ?:mad: When the engine went into this slow mode ,it was...
  20. phillnjack2

    How serious is pitting I see on my lower unit?

    Re: How serious is pitting I see on my lower unit? Get all the paint of in the surrounding area give it a good coat of the proper etching primer and re-spray the area. if it was me i would rub down as much of the gearbox as possible and completely re-prime and re-spray the whole gearbox. If...
Top