Search results

  1. C

    1971 Evinrude fisherman, not pumping water

    both of them can’t need new seals. ??? GC seals ??? you never know till you pressure/vacum test or.... find water in the GC
  2. C

    1971 Evinrude fisherman, not pumping water

    who knows maybe Racerone... pee water is not engine cooling water ....different flow path sometimes. so ??? is this problem something that came up all of a sudden for you or is this a new to you engine that came with a problem. I would pull the PH and do a colonoscopy on it :) btw...
  3. C

    1999 115hp evinrude ficht

    Been reading a lot abouthe FICHT nightmares but..... the 115 was apparently the better one of the lot. The bigger engines ( 150 +) seem to have been very problemeatic yet comments on the 115 have been mostly from happy campers. it depends.... as they say. a lot of problems come from...
  4. C

    One for the collection 6hp Johnson

    don't make this to complicated.... common fogging oil with work fine just rotate the FW a few times after fogging the cyl. s. just put a doggie pad under the GC if you store it upright ! lots of utubes around to help clean the carb changing the impeller is easy as pie and should be...
  5. C

    Rectifier question for 1984 Evinrude E140TLCRD

    if it works you should see voltage go up couple volts on the battery posts after starting the engine. without checking the AC voltage (2 yellows) to confirm the AC source is ok changing the rectifier/regulator won't help.
  6. C

    4.5hp evinrude kicking out of water in reverse

    E5BACSS recheck mdl #
  7. C

    1971 Evinrude fisherman, not pumping water

    wrong base gasket under the power head maybe..... different years different shapes on the 5.5 (uncle of the 6hp fisherman) see pic from vintage outboard. maybe a wrong base gasket was put under the ph by you or previous owner
  8. C

    1999 115hp evinrude ficht

    ok been reading on ETEC KEY ON voltage.... 12v olt is fine at all inj and coils etc.... 40 volts running should be it from what I can gig up.
  9. C

    4.5hp evinrude kicking out of water in reverse

    holes are for the tilt adjust bar and... reverse lock.... pushing the lock lever hooks into the tilt adjust bar....check parts listing for your engine ! some small hps lock by rotating in reverse what is your mdl #....
  10. C

    Water pump

    utube is your friend .....
  11. C

    Evinrude 9.9 Overheating

    better than 200 if ok look further for water restriction OEM and Sierra show it as a 143 thermostat but 153 is probably fine but a bit hot
  12. C

    Evinrude 9.9 Overheating

    recheck thermostat operation and retest watr flow....<200 is to hot ! thermostats open at 140 run a mono line up the pee hole good to hear psi's went back up to 115
  13. C

    Evinrude 9.9 Overheating

    fix the water flow issue something needs fixing... then just run it... my 9.5 9622a runs fine with 65-70- psi it is 30 years old and may simply keep going . all depends on what you want if for.
  14. C

    Johnson sea horse

    nice little troller TN or TD post model # TN27 have standard magneto...easy to fix up if compression is OK I have a similar one in the shed model TN27 http://pochefamily.org/outboard/ why not fix it up ! DO NOT JUNK IT !!!
  15. C

    1999 115hp evinrude ficht

    no offense but you need to progress in steps to ensure proper fuel flow to get your PSI up to specs btw unable to open your atachement ... temp sensor must be ok no EMM faults tank pick-up not clogged ? tank hose is good to engine lift pump ? lift pump surface filter screen ok ...
  16. C

    1999 115hp evinrude ficht

    here are links to ficht up to 70 ...for some base info you can download and print https://drive.google.com/file/d/1RL4u9XPQxTEk6lVk-fPcXxd3O9ctuXL3/view?usp=share_link and ....next is a link to 2002 and up ETEC FICHT for added info...
  17. C

    1999 115hp evinrude ficht

    filter #7 is a VST return line filter .... nothing to do with the HP pump base screen filter if your version of the HP pump does not have an inlet filter at the bottom and the pump seems blocked or won't spin enough by applying 12v & grd directly to it then run some light oil in it...
  18. C

    1999 115hp evinrude ficht

    if anything like ETECs you have filter you can see on the side but.... have you checked the VST return line filter per picture above.... and below . https://www.etecownersgroup.com/post/dirty-filter-photo-reference-11967737?highlight=hp%20filter
  19. C

    1998 Evinrude 15 hp electric start

    it is only complicated when you don't know. :-) glad the video helped.
  20. C

    1998 Evinrude 15 hp electric start

    see minute 5:00 may help
Top