Search results

I'm sitting here looking at my pile of holley carbs..... I'm not a fan of Edelbrock carbs

not difficult if you know how to turn a wrench. first thing to do is pull the exhaust manifold. you will most likely find that the exhaust manifold is leaking into the exhaust port

According to the Forbes article, most of the internet content is now AI generated. https://www.forbes.com/sites/conormurray/2025/10/13/ohanian-and-altman-warn-of-dead-internet-theory-what-is-it-and-how-is-ai-making-it-happen/

Looks AI generated. because trailer axles are usually square, the hardware mounting the axle to the spring is wonky and the coloring is off on the trailer

'nuff said.

get the mercruiser 4-barrel bracket or one of the much much much less expensive generic 4-barrel throttle brackets and make up a new bracket to mount the circuit breaker.

when someone think noodling..... My mind goes to Kathleen Madigan and her bit on rednecks noodling

find a welder and weld a similar bracket to the other toon log. or move the ladder.

you have to buy PDF versions of the manual from Volvo Penta. any other version is a copywrite infringement.

Borrow a dwell meter from the local auto parts store. Or buy one from a yard sale. I bought two last October. Spent $3 on one and $5 on the other. I now have a out 6 or 7 dwell meters displayed on the garage wall.....starting with the one my father had when he was in highschool, the one I...

I personally would never use pertronix again, because every one failed on me. I would stick with points. While yes, you are looking at a file/gap/dwell set service every spring, that is 5 minutes worth of work, and a set of points should last 20+ years your setup is exactly like @Lou C I...

20 year old thread - read rule 12.

there are two companies that make boat glass. None of them make less than the MOQ $500 is cheap for a 35 year old boat compared to others. Most are in the $1200+ per side for curved glass try finding a sunroof panel for a 2016 Cruisers Cantius 48' for under $10k per side (same glass...

the fact that there is a 120hp OMC makes this boat over 36 years old as the last 2.5 liter to roll off of GM's assembly line was 1990 I doubt the structure under the floor is good.

asking the same question in 4 different threads doesn't magically make the rusted beyond service life manifolds suddenly better. buy new manifolds, go boating.

Pontoon boats are stuck between displacement speed and planing speed. its the nature of the hull. there wont be a significant performance jump between 60hp and 115hp on a 2-log 'toon you can turn them into a fast brick, but you must throw A LOT of HP at them. as in 800hp + after you add the...

Many love the taste of beer, just can't have alcohol anymore. My wife is one of those

yes, the little cheesy selector switch. change it from one end to the other, then set it back. that wipes the contacts a bit, cleaning them to get a better contact (common marine tach issue) since your tach looks to have ring terminals, loosen those and re-tighten.

sounds more like you have bad connections. start at the battery, and clean every connection from the battery to the helm on both power and ground. hope you dont boat in salt water. that intake is not designed for salt water.

still doing a half pot on the way into work, and about 2 cups of high-octane coffee (1 k-cup of Cafe Bustelo and 1 k-kup of Tim Hortons in a 16 oz cup)