Search results

  1. alldodge

    stuck 3000 rpm max

    While its best to take it easy for the first 20 hours, sounds like the motor was not rebuilt correctly
  2. alldodge

    Transmission for a small diesel.

    Need to find out who makes a adapter bellhousing. Start with the manufacture to see if it has ever been mounted in a boat. The V drive takes up less room but is taller. If going direct using an outdrive, then use a drive shaft and have a carrier mounted on the transom plate I'm not able to...
  3. alldodge

    master bath remodel

    A hatch, that's different
  4. alldodge

    Troubleshooting ignition coil 5.0 Mercruiser

    MPI ??? https://www.mercruiserparts.com/5-0l-carb-alpha-bravo-0w310000-thru-0w
  5. alldodge

    Shorepower fuse?

    Was thinking about this, and your going to need to move the breakers inside because I don't think they make waterproof double pole type. Either that or see if those covers will go over them.
  6. alldodge

    Troubleshooting ignition coil 5.0 Mercruiser

    No, the negative side is switched to ground by the distributor. You have a TBV ignition. Run through this guide to see what is wrong
  7. alldodge

    1990 omc cobra 4.3 won’t rev above 2500

    Something is missing, things don't add up Carb motor, throttle plate opens wide 6 psi fuel pressure Compression at 150 all cylinders (hope this is about 150 because otherwise its BS)
  8. alldodge

    1990 omc cobra 4.3 won’t rev above 2500

    Wait, when the throttle is moved does it move the carb linkage?
  9. alldodge

    1990 omc cobra 4.3 won’t rev above 2500

    Compression test My guess is the motor is just wore out, because it should rev easy in neutral
  10. alldodge

    Alignment help!

    Having a 1971 you should have spring washer on top the rear mounts. Is it there? The rear mounts may need to be replaced Could also be the engine coupler is warped. Rotate the motor 90* to see if things change
  11. alldodge

    Shorepower fuse?

    Would use 30AMP I'm seeing 2 shore power cables. My guess is they are both 120V 30AMP If they are then need 2 double pole breakers
  12. alldodge

    4 blade prop

    ok, then 17P 4 blade
  13. alldodge

    Distributor problems

    There is a nice on at ship wreck salvage but How about this one https://www.ebay.com/itm/303355351048
  14. alldodge

    1990 omc cobra 4.3 won’t rev above 2500

    Howdy Is your Tach accurate? Can the boat get on plane?
  15. alldodge

    Faulty sending/sensors?

    My guess is your running hot, you should be lower then 175* What is your motor serial number and are you closed cool?
  16. alldodge

    Power Steering Pump Mounting?

    Not all were serpentine https://www.mercruiserparts.com/bam/subassembly/31863/1939/240
  17. alldodge

    Mercruiser 3.0 rough idle at start and stumbles momentarily during acceleration

    Rochester 2GC is a good carb and use to be on the Merc motors.
  18. alldodge

    Power Steering Pump Mounting?

    Most newer ones I've seen are above ALT on port side
Top