My brake lights and turn signals work, but running lights do not, on either side, and I find that strange. Now, one thing I will say, My two yellow side lights, are not connected, but those are in parallel so that shouldn't matter right?
Any ideas?
I need to get my trim working correctly. so I have two things.
My trim switch I dont' think is adjust correctly on my volvo aq290a. Also my trim doesn't seem to work while i'm in gear.
Is this problem related? What should I do to fix these issues?
I read the manual for the trim...
Replacing the belts on my volvo aq290 350 and I thought that power steering pump just moved forward to get the v-belt off?
What am I missing? How do you get the p/s belt off?
I think Know the answer to this one. It starts now, but its getting WAY TOO MUCH fuel. Its coming out hte top of the carb.
I'm thinking that the float was set inaccurately and the seat isn't closing so the bowl just keeps filling. Sound right?
and I'm stumped.
Let me give you the full story.
Originally, the boat wouldn't pick up fuel from the tank, I had it running just fine off an external tank.
I figured I just needed more fuel in the tank for it to pick it up. So I put another 5 gallons in making a total of ten gallons...
I've read the manual, but I guess I don't really get it because I've never seen one working.
My guage either says 00 or -7. Pretty much, how do I make it right and work?
Probably some easy ones.
1. What am I doing wrong running it on muffs? with the drive off and water in the hose coming through the transom, it sucked up water just fine. With the muffs on the lower unit, I have no water coming out the exhaust? Either I'm doing something wrong, or there's a...
I don't know if anyone can help as they are kind of specific.
I've looked at the manual but its too vague. So, here goes.
1. Okay, my ignition switch wasn't getting power, found out the red power wire on the B (main battery from the main relay on the engine) I am only assuming it gives the...
I was just curious as to whether you think its better to put the upper and intermediate on w/o the lower unit on, or if I should put the whole thing together and then install it?
Second, I didn't see it in the manual, but I didn't read every page either,
Should I put grease on the vertical...
Okay, I havn't even had time to really look at the throttle, and I'm realizing some things now
First, unlike the Merc. controls, there's no button in the middle to release it from the shifter to just free rev it. How do you do that?
Second. There are two switches on the handle. One is thumb...
well, I got my engine back in and thought I'd see if I can't crank her over. So I hook up a battery, and turn the key, and nothin'.
I'm going through checking things. I push the main circuit breaker, nothing. I look at my fuses, all look good. I check my ignition switch wiring (because I...
A. Green wire w/ three eylets, one goes to the bellhousing (tag that says "secure to bellhousing") and I'm thinking the other one goes to the water neck by the transom?? but where does the third go? Any ideas? Its an '85
B. the plate that fastens to the bellhosing through the transom plate...
So as you my know, I'm trying to make a 290 and 280 drive work.
I read the manual on shimming the vertical shaft bearing into the race on the intermediate housing. (a 280 lower on a 290 intermediate housing in my case) The process is simple enough, but the tool required is something I...
Trying to remove my intermediate bearing from my housing, both snap rings and seals are off. I've done some searching here on the site but what I can't figure out is this: It is a volvo 290 with a single bearing bellhousing.
1. which way does the bearing come out, towards the front of the...
How do i get the bar that runs through the upper that the trim assembly swivels on? I have the upper off, and i have the water neck off. It looks like a bushing is driven in on the bottom side. Do I need to pull that and is there a snap-ring below that? Or do I just drive it out from the top...
I've been looking for a wakeboard to try to learn. Is a jobe pilot wakeboard any good? would $80 be too much for one that looks brand new with bindings.
which brings up another question, the bindings look different than like, the full foot bindings, what are the differences in bindings?
Thanks
Is it an awful idea to re-use a rubber transom seal on my volvo? The only reason I'm asking is because i'm having a hard time finding one, at least in a timely manner. The rubber looks mint, but I know, things in the boating world seem to alwyas be a big no no. Whatcha think?
Okay, so my volvo outdrive..the one I ask about every other day! :D
its a 290. If i were to put a 280 lower unit on the upper, would I need to shim it?
If so...what in the world is that?
