Search results

  1. phillnjack2

    How do i test the tacho pulse wire ? evinrude 60hp 1995

    Model no BE60TLEOC Serial no G 03751787 I am trying to rig up my tacho on my evinrude 60hp 1995 triple. I know the pulse is the grey wire the positive is purple and black is ground etc. But how can i tell if the Grey pulse wire is working ? i do have positive and negative at the wires but...
  2. phillnjack2

    How and where to fit a water pressure guage and sender ?

    Model no BE60TLEOC Serial no G 03751787 year 1995 USA I would like to know where on the engine to fit a water pressure sender, what exactly i need. The idea of a water pressure guage seems a very good idea to me, to keep check on whats going on. is there a bolt i replace to fit a send etc...
  3. phillnjack2

    Alarm in remote control box replacement 1995 60hp evinrude

    Model no BE60TLEOC Serial no G 03751787 year 1995 USA The alarm/buzzer/horn module in my remote control box is definitely dead.:eek: I couldnt get anything from it when testing and so took it apart to just see whats in it. The wires were just so corroded there is no way of repairing it at...
  4. phillnjack2

    What power trim oil to use in 1995 60hp with fastrak system ?

    I am just in the process of completely rebuilding the power trim on my 1995 evinrude 60hp. Model no BE60TLEOC Serial no G 03751787 The trim unit is the Fastrack system, and im replacing all seals and also putting in brand new rams. Im now not sure what oil to use exactly, as the manual...
  5. phillnjack2

    1995 evinrude 60hp spark plugs..

    Evinrude 60hp 1995 3 cylinder Model BE60TLEOC Serial no G 03751787 I have a bit of a dilema with getting spark plugs for this engine. i cannot localy get the recommended champion spark plugs, i can only get NGK.:( i went to local marine shop armed with the champion spark plug numbers, but...
  6. phillnjack2

    Evinrude 60hp 1995, realy getting me down now...HELP NEEDED

    Hello everyone I have a Evinrude 60hp 3 cylinder,1995 model and i think its been cursed by a DEMON who hates water. Model no BE60TLEOC Serial no G 03751787 My latest problem is driving me nuts. I disconnected the vro as soon as i got the engine to be on the safe side and use pre-mix at...
  7. phillnjack2

    tohatsu 25hp double firing ?

    Hello everyone A friend of mine has a tohatsu 25hp that is in good condition with good compression model is M25A2 We had a problem in the coil and it completely died, so we got another secondhand coil due to no new coil availabilty. this worked for a few weeks then that too packed up due to...
  8. phillnjack2

    Evinrude 60hp 1995 cdi wiring ? HELP needed

    Hi everyone. The engine is a 1995 evinrude 3 cylinder 60hp Model no BE60TLEOC Serial no G 03751787 yesterday when i lifted the hood of the engine to just have a check around etc,i noticed a broken orange wire . The wire comes from the cdi unit and goes into a 5 pin rubber plug. I have no...
  9. phillnjack2

    Evinrude tacho ????

    I have a evinrude 60hp 3cyl 1995. Model no BE60TLEOC Not had the engine very long, so far it runs like a dream. I Just got the original tacho and a few other bits from the owner who said it all works ok. I cannot fire the engine up at the moment due to not being near a water supply. When i...
  10. phillnjack2

    Evinrude 1995 powertrim seal numbers and types

    I have a 1995 Evinrude 60hp 3 cylinder Model no BE60TLEOC Serial no G 03751787 made in USA The 2 smaller Power trim rams are leaking oil and i need to get new seals/ o rings etc. ive been intouch with BRP and they seam a bit expensive considering it just the seas/o ringsl that i need...
  11. phillnjack2

    Battery amp hour for outboard ?

    What size battery is needed for outboard engines with electric start and trim n tilt ? For example, I have a 60hp evinrude electric start with trim and my friend has a 140hp with electric start and trim n tilt. Now both engines will need a certain amount of cold cranking capacity, and both...
  12. phillnjack2

    Morse C3000 ob hydraulic steering pics ?

    Hi can anyone please tell me if there is a metal gasket or washer that goes under the dash on the morse C 3000 hydraulic steering helm unit to take some strain from the dash ? Ive recently got a complete Morse C3000 ob hydraulic system secondhand for my boat, but when looking at the helm it...
  13. phillnjack2

    Evinrude 60hp No Beep at control box !!!!

    Hi i have a 1995 evinrude 60hp, model BE60TLEOC. My question is this. I do not hear the beep when i turn the key on that so many people seem to have on their control box. :eek: I have disconnected the VRO wiring at the engine, i did this as soon as i picked the engine up due to not trusting the...
  14. phillnjack2

    Tohatsu TLDI MD40B2 - TLDI MD50B2 UPRATING ?

    Hello can someone tell me what is needed to uprate a 2010 Tohatsu TLDI MD40B2 to a TLDI MD50B2 UPRATING ? in other words, how do i uprate a 40hp to a 50 on this model engine. I cannot find any mechanical differences as in cc etc between the two, is it just a simple matter of bigger jets or is...
  15. phillnjack2

    Mercury 4hp 1990 shift rod problem !!!

    Hello i have a 1990 mercury 4hp single cylinder 2stroke. Today i took off the lower unit to check the impellor for any cracks breakages etc. When i was moving the lower unit ,i accidently lifted it by the shift rod !!!!! Now i cannot seem to be able to engage the gears F.N.R by moving the rod ...
  16. phillnjack2

    Evinrude 50hp driveshaft stuck, cant get leg off

    Ok we have a 50hp evinrude 1987. the model of engine is E50TLCUD the engine has not been very well looked after at all and maintainance as been almost zero. The engine belongs to a friend and im now trying to get everything sorted out for him for the up-comming season. To say this engine is...
  17. phillnjack2

    evinrude 50hp 1987 carbs spitting back and misfiring

    Hello First of all i will explain what is happening, and then hopefully someone might be able to help or give some usefull advice. A friend has a 1987 50hp evinrude, it used to be vro but its now on premix with everything to do with vro taken of and discarded. This engine has sat for about 3...
  18. phillnjack2

    Tohatsu 25hp runs good wot, wont run slow for long ?

    Ok this is a wierd one for me. But im sure there is planty of good advice from those who know about these engines. 25HP tohatsu 2 stroke. from first starting it will idle ok in nuetral then put in gear,give it wide open throttle and it takes off real good. Infact power is instant. It will run...
  19. phillnjack2

    Getting more power from a suzuki 30hp

    What is the simplest and easiest way of getting more power from a 2 cylinder 2 stroke suzuki 30hp year 1983. Ive seen on the johnson/evinrude engines forum about putting on bigger carbs etc, but is this an option with the suzuki dt30 ? Ive heard that better reeds might give a slight boost in...
  20. phillnjack2

    8000 rpm tacho for suzuki ?

    i have a suzuki dt30 2 cylinder 2 stroke year 1983 engine serial number 03001 304012 electric start longshaft . I am trying to fit a rev counter (tachometer) to keep a check on revs ,but not having much luck. From what i gather i need to put positive to the + and negative to the - and...
Top