Search results

  1. alldodge

    Engine dies after running for several minutes

    Not VL, something with the fuel supply Look into the tank antisiphon valve, fuel lines, pump and fittings
  2. alldodge

    2016 Mercruiser 4.3 TKS Exhaust Riser Gaskets

    It will be ok, just run a bit cooler. The restricted gaskets help keep the manifolds warmer and all over pressure water exits the elbow. The unrestricted will send more water thru the mans before it exits Note the instillation of restricted gasket
  3. alldodge

    Power steering return line keeps blowing at cooler 95' 7.4 Bravo1

    Agree, that hose should never see much above 10 psi if that. You sure that's the return line and not on the pressure side? If should come from the ram, thru cooler to reservoir tank, "open flow" no restriction
  4. alldodge

    Hesitation/RPM Hunting on 496 Mag HO

    What is pressure at idle and WOT? Your motor is in the area where paint was peeling inside the fuel pump and clogging the injectors
  5. alldodge

    Verado Power Steering Problem w. Video

    Welcome but don't know of anyone here that has worked on the new steering maybe @muc
  6. alldodge

    Startup idle issues

    Welcome Running on 2 cyl then later run on 4, this would be in the distributor and wires most likely. Get a spark gap tester and install one at a time on each plug to see what it looks like
  7. alldodge

    2005 5.0 GXI and 97 Silverado 5.0 Timing Sets Different

    Not sure if it's an improvement but does add extra teeth
  8. alldodge

    4.3 GXI SXA no water coming from seawater pump

    Check the connection where the outdrive connects to the hose leading to the raw water pump. They get clogged up
  9. alldodge

    Dean's List gets another motor

    Motor went in today, GS got to help so he had some fun. Then we went back to the water.
  10. alldodge

    Maybe my turn for new boat time

    Went to change the oil for first time and noticed 2 items are broke on the starboard motor under the cowling. Has a plastic cover over part of the exhaust which has maintenance label on it. One of the tabs is broken and the clamp that holds the motor connector is also. My guess is dealer was...
  11. alldodge

    New boat- high idle 5.7 efi

    You could but motor was designed with the valve. Changing things is usually not a good idea. Also a properly operating motor will have some blowby, just very little. The pcv helps evacuate these gasses
  12. alldodge

    Anyone please help with my mercruiser 5.7 thunderbolt v igntion engine, hard to start

    Going into neutral is when the interrupter is used. The Alpha drive cannot be put into neutral when boat is in the water without it. If the switch hangs it will kill the motor
  13. alldodge

    Help please

    Thanks Will need to remove the mans to install the boots. Going to probably need some help Gets some all thread or couple of long bolts and cut the heads off. The long bolts is so you can slide the mans on them to hold the weight. Once boots are in place install other bolts. Get all the...
  14. alldodge

    Kodiak Anchor - Made by SouthCoast Marine . . .???

    Might also suggest put another Shackel between swivel and anchor
  15. alldodge

    Help please

    Welcome With no elbows I would think it's a OMC, step back a bit and post another pick showing the whole manifold
  16. alldodge

    Volvo Penta 5.0 GXI-E - Won't roll over

    This thread has come a long way from "won't roll over" and I'm starting to forget things What is fuel pressure at the rail when it first starts and runs rough? Pressure when it runs ok? Pressure cruising and WOT?
  17. alldodge

    New boat- high idle 5.7 efi

    Anyone of the GM should do the trick, nothing special
  18. alldodge

    Black Scorpion Mag Mpi fuel pressure

    Reg part number is 807952A1 or Mallory 9-33205 (30 psi) Item 13 https://www.mercruiserparts.com/bam/subassembly/31440/10108/50
  19. alldodge

    New boat- high idle 5.7 efi

    Port should be PCV
  20. alldodge

    VP 4.3 MPI sluggish on holeshot

    I would suspect timing before plugs. Even with wrong plugs it should do ok
Top