Search results

  1. alldodge

    Installing electric brakes on trailer -- wiring question

    Ground is white and brake power is Blue.
  2. alldodge

    Mercruser 1. Trim pump upgrade

    Since your replacing everything with new style yo don't need the reverse lock. If the motor will not even come on then there is a wiring problem. What control buttons do you have (3 button)?
  3. alldodge

    Stalling

    The shift switch should only move when the boat is in the water, in gear and your shifting into neutral. Adjust the lower shift cable to make sure its is adjusted correctly If this is correct, then adjust the shift switch so it is positioned in the center
  4. alldodge

    New engine won’t start

    Its internal, just behind the timing chain cover
  5. alldodge

    Mercruiser Won’t Run After New Distributor Cap

    Firing order
  6. alldodge

    1975 mercruiser 165 starting issue

    Yes No If that does not work use jumper cables to connect between the two large post to bypass it
  7. alldodge

    1975 mercruiser 165 starting issue

    Cross these two shown should energize the relay and the starter should crank the motor. If this does not happen, you can jump across the larger terminals on each side which by passes the solenoid. Doing it this way will pull a lot more current, so if done use large cables
  8. alldodge

    Hurth ZF v drive transmission

    Have not heard about 10W anything in a ZF and looking at the manual there is plenty of fluids listed, but no 10W something. Maybe this comes up (I'm dating my self) from the old thing about manual transmissions. In the old days, bad car sales folks would put saw dust in a transmission to make...
  9. alldodge

    97 Volvo Penta 5.7L GLPLKR I/O Parts help

    Helm wiring
  10. alldodge

    Volvo Penta MD7A Starter

    The LH and RH rotation is based from looking at the flywheel. The various starter location advises which rotation is needed to rotate the motor based on where the starter is located. The starter mounted on the port side down low, and needing a RH motor rotation then you need a CCW starter
  11. alldodge

    OMC 3.0 1990 EST Ignition intermittent spark problem

    Suggest testing the distributor in link above
  12. alldodge

    Volvo Penta MD7A Starter

    You have a right hand (RH) rotation motor. The rotation of the starter depends on where its mounted
  13. alldodge

    Volvo Penta 5.0gi. Won’t start

    Have you bypassed the fuel pump relay, get the pumps running and try to start? The ECM applies a ground to pin J1-23 which energizes the fuel pump relay. The 12V is passed thru a fuse an thru relay to pump. The connection I added which was missing was a Pink/white wire which comes off the...
  14. alldodge

    97 Volvo Penta 5.7L GLPLKR I/O Parts help

    Looked in the LK manual and its showing the same as I have. Need BruceB to assit because I'm missing something I guess. Using the GL-A thru GL-E show the similar wiring, and don't see any relay and if a fuse blew I don't see if running at all.
  15. alldodge

    Boat suddenly died won’t turn over and no trim

    Check for power on both sides of the 50 amp breaker. The click can be a bad connection or a bad starter relay
  16. alldodge

    Is this a problem (Pics)

    Great no leak, and it might be an optical illusion but the gap looks closer and if you look at the threads, I don't see the same amount of threads. Otherwise I don't see an issue
  17. alldodge

    Bilge pump question

    How to, and forgot to reduce the pic in front so the pic in back is point to select size. Once size is selected it paste where ever your curser is at the time, so make sure its where you want it
  18. alldodge

    Bilge pump question

    How to post pics If you select the wrong size you can remove and repost
  19. alldodge

    2006 Merc controls

    Need to push both buttons. As GA said the bottom is throttle only and top is the lock to hold in neutral
  20. alldodge

    2007 4.3L TKS Mercruiser starts and runs then dies after about 30 minutes.

    You need a vacuum fuel pump tester and a Tee fitting. The fitting is placed between the carb and fuel pump. Merc has part number 91-18078 or can make one up from rubber hose and fittings found at the auto parts store
Top