Search results

  1. jtcarter

    link and sync and hot foot's

    I have a 175 intruder motor 95 looper. I take the cable loose and set the link and sync to occure at the same time. When i hook it up to my foot pedal it pulls the cam roller and cam follower off the tab. Does it matter as long as i have them occuring together or should i get it run right up to...
  2. jtcarter

    175 evinrude intruder 95 (missing)

    It is coming out of the hole like a slug and now has developed a miss. I had two more people in the boat today and i could get it to run but it was sluggish and started missing. Checked all plugs some a darker shade of tan than the others but most of them looked alright. One in particular had my...
  3. jtcarter

    No spark 175 evinrude intruder.

    Well i get my starter problem fixed. So i fire my motor up in the driveway last night on the muffs runs fine for a few minutes so i shut her down. Dropped it in the lake this morning and no spark at all. It tried to fire maybe once then went dead and had no spark. Checked all my ground wires and...
  4. jtcarter

    What just happened?

    I'am changing my thermostats on my 175 evinrude intruder and i get finished installing new stats. I go to start the motor an it turns over maybe once then nothing. All i'am hearing is a clicking noise coming from probably the silenoid. Motor won't crank at all:confused:. This motor is cursed...
  5. jtcarter

    fuel line syphoning behind primer bulb?

    Well i have a 175 evinrude intruder. I was doing some trouble shooting. Seems to happen with this motor alot. I'am about to start comparing it to a harley. Anyway back to the subject. I don't have a antisyphon valve at the tank, i took it out. Brand new fuel line from tank to motor. I have a...
  6. jtcarter

    recirculate check valves 175 evinrude intruder

    Well here we go again. I took the recirculate check valve lines loose to see if i could find a clog. Well my check valves are in behind the carbs on the manifold anyway. I was trying to blow through them from the block side to the carbs and no flow that way. I tried pulling air and got fuel on...
  7. jtcarter

    One stubborn outboard 175 evinrude intruder 95 model

    Well i've done about all i know to do to this motor to get it running right but it refuses. I have recently did away with the vro and went with a electric fuel pump and premix. It runs the same as it did when i had the vro on it. It still lean sneezes despite having the idle screws run out about...
  8. jtcarter

    vro2 pump

    I have a 1995 175 evinrude intruder. I've been told i can't convert to just a regular fuel pump by one mechanic and that i can by another. I have a fuel restriction or a weak fuel pump. I Did the vaccum test earlier this week. On the fuel line to pump test at WOT it showed at reading somewhere...
  9. jtcarter

    95 175 evinrude intruder (stalling problem)solved somewhat.

    I've been fighting what i now know is a heat soak problem. I took it out today. It had some vent tubes behind the loovers so i took them off to see if getting more air in there would help. I ran maybe 5-6 miles up river. Fished for about a hour and a half. Restarted my motor and she spit and...
  10. jtcarter

    Weird problem on my lemonrude

    I've chased this thing until i've about to run out of answers. I get to the lake today make a run to my first fishing spot. Turn off my motor and fished for awhile. Restarted it it took off no problem. I then made a long run up lake and fished another spot of mine. Again i turned off the motor...
  11. jtcarter

    hot foot sticking

    I have a t&h hot foot that came with my boat. I've been having trouble with it sticking. I just installed a brand new cable. Just today i took the throttle arm off and regreased it were it sets down in its grove. Greased the spark advance cam arms were they rotate. I can unhook the cable and it...
  12. jtcarter

    I'am about to pull my hair out.

    I traded for a 18 and a half foot hydra sport with a 175 evinrude intruder this spring. It ran fine while it was cool. When it started heating up i started having all kinds of problems. Heat soak made the most sense and still does. Anyway i've went through the ignition. New...
  13. jtcarter

    rectifier test

    My manual says to use a ohm meter on its highest setting and test both the yellow solid lead and the yellow and gray lead. Its says to ground one lead to a good engine ground and test one at a time. You should get current going one way reverse the leads and no current the other way. It also says...
  14. jtcarter

    Compression test

    I just ran a compression test on my 1995 evinrude intruder motor. I didn't do a decarb and my gauge is probably somewhere around ten years old although its been used rarely. 1)98 2)99 3)95 4)95 5)92 6)92. Someone had did a compression test on it in 2003 those numbers where as follows 1)105...
  15. jtcarter

    Sealer?

    I have a 1995 175 evinrude intruder i have the carbs off of it right now. On the bottom of the float bowls there is a little brass plug on the side of the bowl. Anyone have any suggestion on what to use to seal those up?
  16. jtcarter

    stator test

    I performed a stator test on my 175 evinrude outboard with a ohm meter. The book said that i should have between 0.05-0.19 reading on a 35 amp charging system. The reading i get and i do have my ohm meter set on its lowest setting is 1.5 about where it says a 6 amp system stator should read...
  17. jtcarter

    95 175 evinrude intruder (stalling problem)

    I just bought this motor and it has a weird little issuse going on. When i first get to the lake for maybe the first couple of hours i don't have any problems with it. Then after that everytime you trim it down and try to push the hotfoot it stalls. After several attempts you can feather it...
View older results
Top