Search results

  1. R

    Unfindable(so far) gremlin

    The universal magneto was used from about 1950 and up to about 1986 ( 4 HP ) ----It is a wonderfully simple and reliable unit.----2 ignition systems under the flywheel.---Allows motor to run on one cylinder in case of failure.----Cheaper to own and maintain then some electronic systems.----But...
  2. R

    Tube pulling?

    I ordered a 5 person pull toy.-----When looking for a tow rope the sales person asked ---" do you have enough power " and I said " 150 HP "-----So the rope I got would pull a small car out of a ditch.------All I am saying is make sure you have hefty rope and a solid place to hook onto the...
  3. R

    1999 Johnson 50 j50pleea shift rod height?

    All " clutch dog " motors need the motor running or the prop shaft turning for easy shifting.----Not sure why some do not understand and argue about it.----Has to do with gears lining up so that clutch dog can slide properly.
  4. R

    Johnson 50 hp 1996 ran well then died.

    The electric primer replaces choke flappers.----The electric primer is a valve.----It is not a pump.-----When you push in the key while cranking it opens.----The fuel pump provides fuel to the open primer valve.----This fuel then goes directly into the motor and bypasses the metering circuits in...
  5. R

    Water leaking by spark plugs

    Replace the gasket.----Using heat on the block ( where bolt threads in ) will help getting bolts out.
  6. R

    96 evinrude 50hp sputters after WOT

    Test run with another tank and hose.
  7. R

    '88 Evinrude model difference.

    The----T ----Might refer to tiller operation.------Or power trim / tilt.-----And a 3 cylinder " commercial " motor generally come without oil injection or power trim and tilt.----Also some came as manual start.-----And commercial motors are identical to pleasure motors as far as internal parts.
  8. R

    1999 Johnson 50 j50pleea shift rod height?

    Fact for you to ponder and understand.----When shifting those motors you have to turn the propshaft.
  9. R

    1999 Johnson 25 carb help req.

    Most folks simply have no idea how much it costs to maintain a parts warehouse that would cover 40 years of motors with 20 or more models each year and some with 600 parts each.-----Many products hit the market each year.-----No service or spare parts at all.----Just the way it has gone !
  10. R

    I got a 1978 35HP 35853R. Question.

    There was a battery charging kit available.----Any yellow wires coming from underneath the flywheel ?---There was a power tilt kit as an option as well.----For power tilt and trim you have to look for an aftermarket kit.
  11. R

    1999 Johnson 50 j50pleea shift rod height?

    Well for about 70 years or more outboard gearcases have been filled from the bottom.-----That way as the oil rises the air is pushed out and you are 100% sure it is at the correct amount.---Many years ago folks came into the repair shop with burnt up gears. ---Admitted they changed the oil...
  12. R

    1972 merc 110 Blue Stripe hood, Ser# 3267158 Exhaust/Steam? coming out taletail

    After water has gone through the block it is discharged into the exhaust.----You have mistakenly identified that as a major leak.----When you study this after power head is off you will see the simple facts !!
  13. R

    1999 Johnson 50 j50pleea shift rod height?

    Sorry----I ( volunteer ) can not see, hear or feel your motor.---When / how did you lose reverse ?----What is the measurement now.------Some folks want / demand instant answers but do not post the correct details on this site.----Use the best quality oil in there ( BRP brand ) at your...
  14. R

    ghost motor?

    The model # indicates it is a 1975 model.-----The 78 model is a totally different engine block.-----Pictures would identify it in mere seconds.----Often no listing for a 20 HP and the 25 HP is used to find the parts.
  15. R

    1999 Johnson 50 j50pleea shift rod height?

    Well---- 21-15/16" is correct and the ----L---in your model indicates it is a long shaft.----Take good care of that lower unit as they are not the most ROBUST units out there.
  16. R

    1984 Johnson 60hp shift rod adjustment height

    29/32" I think.----Or perhaps you need a better quality measuring device.----Or put your own marks on the yard stick.----Very easy I think.
  17. R

    How to restore Factory Timing, 1983.

    Perhaps a broken wire coming out of the timer base.
  18. R

    1984 Johnson 60hp shift rod adjustment height

    Can you divide 32 into 29 ?----Nobody hands out any beer tokens for top notch advice here.----And sorry , i do not know what tools and knowledge are in your workshop ??
  19. R

    1972 merc 110 Blue Stripe hood, Ser# 3267158 Exhaust/Steam? coming out taletail

    Powerhead needs to be removed.----Just 6 nuts and some linkages.----In my opinion an easy project.-----Not saying it is your problem , but if you do not inspect you don't know.
  20. R

    1984 Johnson 60hp shift rod adjustment height

    I believe you should know some grade 4 math here !---Do the calculation , perhaps even on your phone.
Top